Click here to order with free shipping.Team Iceshanty Patches! Most iceshanty boards are represented
Which model and which Ice-Ducer? There may be model-specific issues folks could advise you to watch out for.I bought my FL-18 the year they came out (2001/2002 ice season, I believe) in an Ultra Pack setup w/ the dual beam (9/19 deg) Ice-Ducer. I have used it every season since. It was my first, and is my only flasher today. The only "work" it has needed in all those years was to replace the battery. If you are looking at FL-8 models, I would probably stick w/ the FL-8SE (avoid the old FL-8 and FL-8ST).I would do 8 things in particular:1) Hit YouTube for the specific model(s) you are checking out. Give yourself a crash course in how to operate and read it.2) Give the unit a good overall visual inspection (bring and use a flashlight), you will get an idea of how well it has been cared for.3) Take a look at all battery and wire connections (including switches/meters if applicable), there should be little to no corrosion.4) Power it up and see how bright the display is in daylight. If it is hard to read, I would pass - it may be worn out.5) Let the unit run for a couple of minutes. If you hear any noises coming from it other than the Vexilar hum, I would pass.6) Place the bottom flat of the Ice-Ducer puck to your ear when unit is powered up. You should hear rapid and repetitive clicking (this is the sonar working). If you do not hear this, something is wrong (likely the transducer is shot).7) Test the depth reading thru the air. The speed of sound thru air is ~343 m/sec. The speed of sound thru water is ~1480 m/sec. The ratio should be ~.232 = (343/1480). So holding the puck steady & level at an elevation of 24 inches (bring a tape measure as well) over a hard surface (garage floor would work well), the unit should read a depth thru air of approximately 9 feet (b/c the unit is designed to read thru water). I do this test every year prior to hitting the ice.8) Do not buy without being able to test the unit, but plan on replacing the battery if you acquire a used unit (lithium is the way to go these days).Also see:Best of Luck!Additionally --> I suggest reviewing the following to understand the theory of operation:https://vexilar.com/blog/2019/12/04/how-sonar-works#:~:text=What%20a%20sonar%20device%20(depth,Ray%20Tube%20(TV%20screen).&https://vexilar.com/blog/2019/12/04/choosing-a-transducer-beam-angle
Which model and which Ice-Ducer? There may be model-specific issues folks could advise you to watch out for...
Thanks a lot that is considerably more info than I ever thought I would get from a first post question here. It's an FL-12, apparently just needs a battery. Not sure which transducer is on it, but he sent me pictures of it running last night as he can still power it up while on the charger. I will definitely run through the things you suggested.Also was wondering what the best replacement battery would be for it? Looks like lots of options on amazon.