Top
Proshop
Sponsors
News:
Fly the Team Iceshanty Flag!
Iceshanty Proshop
Home
Forum
Help
Login
Register
IceShanty.com's Ice Fishing Community
»
Ice Fishing Tips -Check your local regulations!
»
Equipment
(Moderator:
Bean
) »
Rod Holder / Tip-Down / Windlass idea
Print
Pages: [
1
] |
Go Down
Author
Topic: Rod Holder / Tip-Down / Windlass idea (Read 25663 times)
P Gottshall
Guest
Rod Holder / Tip-Down / Windlass idea
«
on:
Dec 15, 2004, 03:52 PM »
I really liked sbfPA Mike’s PVC rod holder design. I also like the HT rod-holder I picked up for $1.79 at Farm & Fleet, which basically props up both ends of the rod. I also would like to have a tip-down, & why not a windlass while I’m at it?
So, in total boredom today, my son & I made all four at once. I figure we have about $1.50 wrapped up in this.
PVC is wonderful stuff!
Too much time on my hands with no ice (notice the green grass in central-IL in the 2nd picture),
Paul
ps - checkout all the "inventions" I've been accumulating in
http://www.iceshanty.com/ice_fishing/index.php?topic=15334.0
Here's my copy of sbfPA Mike’s idea:
(see
http://www.iceshanty.com/ice_fishing/index.php?topic=14548.msg119881#msg119881
)
Can also suspend the pole:
A stiff 1/8" wire makes it a tip-down:
Bend the wire up & add a stiff piece of plastic, & it's a windlass.
Logged
Bean
IceShanty Mod Team
Team IceShanty Maniac
Posts: 3,169
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #1 on:
Dec 15, 2004, 04:23 PM »
Way to use your noggin' there. Let us know how they work out for you. Good Job!!!
Logged
Ken
Spud_bar
Team IceShanty Regular
Posts: 138
Poppin' Swedish Pimples since '96
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #2 on:
Dec 15, 2004, 05:00 PM »
that's the epitimy of cheap but effective. very practical and THANKS FOR SHARING!!! I may have to build one or two. better patent that idea!
Logged
All work and no play makes Jack a dull boy.
bucketmouth
Team IceShanty Addict
Posts: 829
Have an ice day!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #3 on:
Dec 15, 2004, 06:54 PM »
nice design! Mmmm ButterPecan....
Logged
bigfish57
Team IceShanty Maniac
Posts: 1,306
love them square tails!!!!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #4 on:
Dec 15, 2004, 06:55 PM »
Hey, thats a really good design!! thanks for sharing!
Logged
Anthony
Tombo
Team IceShanty Regular
Posts: 423
Ice Fishing Rulez!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #5 on:
Dec 15, 2004, 09:30 PM »
Hi Guys:
Can someone tell me what program I am missing--all I get for these pictures are little boxes with red "X"'s inside. I have tried right clicking and "show picture" but,to no avail.
I do get a pop-up for sharemation but just close it.any help would be appreciated. Thanks
Logged
P Gottshall
Guest
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #6 on:
Dec 15, 2004, 09:37 PM »
Tombo,
You're not missing anything. I'm seeing the same boxes; Sharemation.com has a problem tonight. Again. Try again later.
FYI - I moved my pics from sharemation.com to photobucket.com, as I've had this problem several times. Hopefully pics will be regularly available now.
Paul
Logged
Tombo
Team IceShanty Regular
Posts: 423
Ice Fishing Rulez!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #7 on:
Dec 16, 2004, 10:13 PM »
Thanks Paul--I thought maybe I needed a different program to see them....as you can tell I'm not all that computer literate.
Nifty designs,I might have to try and build me some of those. I hope you get ice pretty soon-I know what waiting is like. I just got out today,first time on the ice this year, although we have had safe ice for a week or so now,I just haven't made it out untill today.
This is late for us(in Sask. Can.) but it's been extremely mild so far. I didn't get to my favorite spot,consequently,I only got a few tulibee(C+R....not eating those things) but shack goes out this weekend on a honeyhole(I hope) then I should get perch and walleye with the odd Northern thrown in just to test my line.
Thanks again and good luck on the ice this winter
Tombo
Logged
bucketmouth
Team IceShanty Addict
Posts: 829
Have an ice day!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #8 on:
Dec 29, 2004, 04:46 PM »
Paul, a couple of questions. I built one of these and was wondering about a few technical issues. Is there any way to secure your rod to the hanger in such a way that the monofilament isn't seated against the hanger along with your rod handle? It'd be nice to fine tune my drag so that the fish can rip some drag rather than try to pull my rod in but as it is the mono is seated/pinched in the bend of the hanger.
Also, do you have any ideas to secure the hanger in the holder so that it can't possibly pop out under load from a fish. It's possible that part is just a construction flaw on my part but I can see the wire hanger "popping" out when the fish has taken the bait and my rod nosediving into the drink.
Any suggestions?
Thanks and Great Design!
iceshack05
Logged
P Gottshall
Guest
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #9 on:
Dec 30, 2004, 11:16 AM »
jigwiggler is right, just bear in mind that you'll need to pick up the rod/wire assembly when fighting the fish.
To prevent losing your rod, the best suggestion I've seen is to tie a string between your rod & the holder. The fish I'm catching rarely hit that hard, but it's a good precautionary measure.
You could drill holes through the PVC & run the wire through them. Then the whole thing would be pretty secure. The only drawback is, to be able to pickup your rod, you'd then need to run the line over-top of the wire, which is what you were trying to avoid in your first question.
Paul
Logged
river_scum
Team IceShanty Maniac
Posts: 4,969
hook n cook
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #10 on:
Jan 06, 2005, 09:38 AM »
WOW imimpressed!!!!!! that is awsome man. thanks for sharing that for sure. im off to the store,lol muahaha.
Logged
real fishermen don't ask "where you catch those"
OANN the real story
- member here since -2003- IN.
kingfshr16
Team IceShanty Addict
Posts: 687
Hardwater Nut!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #11 on:
Jan 06, 2005, 09:15 PM »
I built a rod holder off that same design and im very happy the wya it came out, thanks for posting your idea.
Logged
Jason
fish_hooked
Guest
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #12 on:
Jan 17, 2005, 07:53 AM »
A possible update to the design....
Run your notches that the wire sets in on the PVC further down and instead of a loop in the wire for the rod to set in ... find the balance point for your rod, drill a small hole through the handle and run the wire through the rod handle. If your still worried about losing your rod down the hole, make the wire a couple inches wider than the size of auger hole you typically drill.
Logged
walleye tattoo
Team IceShanty Addict
Posts: 644
Wisconsin chapter
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #13 on:
Feb 03, 2008, 04:21 PM »
Looks to me like more to drag out on the ice .JMO
Logged
Live to fish forced to work
pascoag icefisher
Team IceShanty Addict
Posts: 975
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #14 on:
Mar 29, 2008, 06:34 AM »
thanks for the idea.
Logged
jimmyclaude
Team IceShanty Maniac
Posts: 3,420
I Have Trouts!!!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #15 on:
Mar 29, 2008, 06:57 AM »
Now add the slammer mode.....
Logged
Tastes like RockBass<br /> \"Official Horticulturalist of the NYRC\"
MrMarty51
Team IceShanty Addict
Posts: 893
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #16 on:
Mar 29, 2008, 07:10 AM »
Quote from: jimmyclaude on Mar 29, 2008, 06:57 AM
Now add the slammer mode.....
Great idea and looks like a wonderful invention.
Besides the slammer mode maby one of those little mini bungee cords on the handle end of the rod{when in non windlass mode} to keep a big one from snatching it outa the holder. 8)
And just one more question,"Why not become a member then Ya would`nt have to sign in under guest and Ya get a whole new handle of Your choosing.
Logged
"Every hour spent fishing is NOT taken from ones life"Quote from Grant Boyson
pooley
Team IceShantyholic
Posts: 5,069
It's cold in here!
Re: Rod Holder / Tip-Down / Windlass idea
«
Reply #17 on:
Mar 29, 2008, 08:12 AM »
like this.
Logged
T-7 Custom Rods OFFICIAL B.BREAKER OF NYRC i volunteer because your life depends on it! 343
Print
Pages: [
1
] |
Go Up
IceShanty.com's Ice Fishing Community
»
Ice Fishing Tips -Check your local regulations!
»
Equipment
(Moderator:
Bean
) »
Rod Holder / Tip-Down / Windlass idea
Iceshanty
|
MyFishFinder
|
MyHuntingForum
Contact
|
Disclaimer
|
Privacypolicy
|
Sponsor
© 1996- Iceshanty.com
All Rights Reserved.