The Ice Fishing MA is board

Author Topic: JetSled Modification  (Read 3256 times)

Offline unoman

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 2,939
JetSled Modification
« on: Dec 09, 2007, 12:18 PM »
With inspiration from Ron Carr I decided to modify my Jetsled....check it out

Easy to do...jigsaw, drill, 1.5 inch PVC and some strong wire ties....

Sick of fighting jig sticks out of a bucket..

Whaddya think?


Offline yakk

  • Team IceShanty Regular
  • ***
  • Posts: 312
Re: JetSled Modification
« Reply #1 on: Dec 09, 2007, 01:18 PM »
i like it . uno , would a gas auger and a couple 5 gal buckets fit on that sled ?   yak

Offline unoman

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 2,939
Re: JetSled Modification
« Reply #2 on: Dec 09, 2007, 01:24 PM »
Yakk

I fit one bucket with my vex, a good size ash basket with my tilts, auger, bait bucket, aquaview and chair...also carry stove if needed and my expedition suit (dont wear it walking out and drilling)....i get some help from the bungi cords....thats why i attached the holders on the outside of the sled..K


Offline jeepsw1

  • Team IceShanty Addict
  • *
  • Posts: 952
  • Zippo Outdoor pro-staff
Re: JetSled Modification
« Reply #3 on: Dec 09, 2007, 01:40 PM »
some nice mods, don' think they would work on a Jet sled JR though.  i made a box out of a plastic trunk i picked up at walmart.  put rod holder on the lid, all gear goes in the trunk, then chair, auger and shiner bucket get bungeed on top.




Offline yakk

  • Team IceShanty Regular
  • ***
  • Posts: 312
Re: JetSled Modification
« Reply #4 on: Dec 09, 2007, 01:49 PM »
thanks k . jet sleds my next buy , if i can get down to bass pro .

Offline yakk

  • Team IceShanty Regular
  • ***
  • Posts: 312
Re: JetSled Modification
« Reply #5 on: Dec 09, 2007, 01:53 PM »
jeeps , nice setup . i'm not that organized ,though working on it .

Offline unoman

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 2,939
Re: JetSled Modification
« Reply #6 on: Dec 09, 2007, 02:32 PM »
yeah...i found the JR too small....nice mod Jeeps....I like it..especially the box idea...although looks tight for a gas auger....My next move would be a  removeable frame setup go stack efficiently...maybe a box for a base...K

Offline jeepsw1

  • Team IceShanty Addict
  • *
  • Posts: 952
  • Zippo Outdoor pro-staff
Re: JetSled Modification
« Reply #7 on: Dec 09, 2007, 02:50 PM »
have to break the power auger in 2, powerhead goes up front in the empty space, and the bit goes in the same place the hand auger bit is

Offline pikeking

  • Team IceShantyholic
  • ***
  • Posts: 5,233
Re: JetSled Modification
« Reply #8 on: Dec 09, 2007, 03:49 PM »
If I used jig rods I would do the same thing. looks sweet.
If fishing was work I'd never be sick!


Offline GOT PIKE

  • Team IceShanty Regular
  • ***
  • Posts: 489
  • GO GODS
Re: JetSled Modification
« Reply #9 on: Dec 09, 2007, 05:49 PM »
Hey uno, Ron will be looking for royalties when he sees that set up..
Work is for people that don't know how to fish.........

Offline unoman

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 2,939
Re: JetSled Modification
« Reply #10 on: Dec 09, 2007, 06:38 PM »
Only after I add another 10 holders... ;)

Offline Coastie

  • Team IceShanty Regular
  • ***
  • Posts: 322
Re: JetSled Modification
« Reply #11 on: Dec 09, 2007, 07:28 PM »
Should mount the auger on the back like an outboard motor lol :laugh: I love it uno. You might need a spare paddle for that boat.

 Coastie

Offline Danderson

  • Team IceShanty Addict
  • *
  • Posts: 944
Re: JetSled Modification
« Reply #12 on: Dec 09, 2007, 08:57 PM »
i've started building a trunk style sled for my auger, i've outgrown my jet sled jr to my standards, lol.

i'll post pics once i get somewhere with it, meanwhile, anybody have crappy skis i could use for it?

Offline fisherman58

  • Team IceShanty Regular
  • ***
  • Posts: 324
Re: JetSled Modification
« Reply #13 on: Dec 10, 2007, 05:46 AM »
With inspiration from Ron Carr I decided to modify my Jetsled....check it out

Easy to do...jigsaw, drill, 1.5 inch PVC and some strong wire ties....

Sick of fighting jig sticks out of a bucket..

Whaddya think?
IF YOU CUT SLOTS WHERE FOR THE REEL ARM  THE ROD WILL SLIDE IN A LITTLE DEEPER AND WONT POP OUT ON BUMPY RIDES  I LOST ONE BEFORE I DID THIS
(Image removed from quote.)

Offline unoman

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 2,939
Re: JetSled Modification
« Reply #14 on: Dec 10, 2007, 02:40 PM »
fisherman...great minds think alike!!!...I cut slots in tubes last nite to stabilize..noticed alot of movement as I pulled it back in garage.... :)

K

Offline Roncarr

  • Team IceShanty Maniac
  • **
  • Posts: 2,955
  • If it swims I will JIG IT!!!!!!!!!!!!!!!!!
Re: JetSled Modification
« Reply #15 on: Dec 10, 2007, 05:09 PM »
Hey uno, Ron will be looking for royalties when he sees that set up..
I think you could get 15 rod holders on each side when you make those mods my lawyer will contact you ;D
ps nice jeeps love to see all mods from home made gear
no flag just a perch doin a drive by 

Offline troutfinder23

  • Team IceShanty Regular
  • ***
  • Posts: 126
Re: JetSled Modification
« Reply #16 on: Dec 10, 2007, 06:37 PM »
I took a piece of ply wood about half the lenth of my jetsled jr Installed some hinges on the front of the sled  and now I can store things underneith and I have a flat surface on top  to bungee things too.  It also makes a good seat

Offline yakk

  • Team IceShanty Regular
  • ***
  • Posts: 312
Re: JetSled Modification
« Reply #17 on: Dec 10, 2007, 09:30 PM »
I took a piece of ply wood about half the lenth of my jetsled jr Installed some hinges on the front of the sled  and now I can store things underneith and I have a flat surface on top  to bungee things too.  It also makes a good seat
any pics ?

Offline unoman

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 2,939
Re: JetSled Modification
« Reply #18 on: Dec 10, 2007, 09:37 PM »
sounds good troutfinder.....lookin to expand...hopefully someday I can live on top of my jetsled!!!! 8)

Offline troutfinder23

  • Team IceShanty Regular
  • ***
  • Posts: 126
Re: JetSled Modification
« Reply #19 on: Dec 10, 2007, 09:47 PM »
I will put some pics on tommorow.  It is very easy and cheap.  Bt it works great


Offline yakk

  • Team IceShanty Regular
  • ***
  • Posts: 312
Re: JetSled Modification
« Reply #20 on: Dec 10, 2007, 09:59 PM »
sounds good troutfinder.....lookin to expand...hopefully someday I can live on top of my jetsled!!!! 8)
i was just looking at roncarrs setup again , and it looks like the grinch's little dog should be pulling it up a snow bank . :) i'm jealous .

Offline Roncarr

  • Team IceShanty Maniac
  • **
  • Posts: 2,955
  • If it swims I will JIG IT!!!!!!!!!!!!!!!!!
Re: JetSled Modification
« Reply #21 on: Dec 11, 2007, 02:42 PM »
what do you get a little boy who has everything?????

http://i31.photobucket.com/albums/c353/roncarr/12907001-1.jpg[/img]]
no flag just a perch doin a drive by 

Offline BASSandICE65

  • Team IceShanty Maniac
  • **
  • Posts: 1,886
  • Go Pats!!!!
Re: JetSled Modification
« Reply #22 on: Dec 11, 2007, 03:17 PM »
Karl nice mods on the sled. I put my old one on skis for when the snow gets deep. Jetsleds are heavy dragging when loaded up in deep snow. I like the rodholders but ya need more right Ron :cookoo: I think he has 15 now lol. Hope to see ya out there again. And Ron the pic of luke is priceless he's gonna be just like his dad ;D

Keith
  



Anyday fishing is better than your best day working!!!!!!!!!

Offline unoman

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 2,939
Re: JetSled Modification
« Reply #23 on: Dec 11, 2007, 03:35 PM »
Frame that picture Ron...but he needs his own chair cause I can see Haleigh in the background checking on her chair

good idea on the ski mount Keith....

let me know if you guys go out saturday  or sunday....Karl

Offline bumps

  • Team IceShanty Regular
  • ***
  • Posts: 408
  • Hardwater Nut!
Re: JetSled Modification
« Reply #24 on: Dec 11, 2007, 05:32 PM »
Looks good Karl!  Love to see different set ups, it always sparks new ideas for modifications for my sledbox.  Keep the ideas coming! ;D

Offline TRT

  • Team IceShanty Maniac
  • **
  • Posts: 1,283
  • Trout/Salmon
Re: JetSled Modification
« Reply #25 on: Dec 16, 2007, 05:53 PM »
I use the following set up. I tie two large orange sleds about 4.5 long. I can then place my
3 person shanty inside the two sleds. Shanty fits perfect inside an sleds pull easy with heavy
load. My brother drags a large jet sled an works harder w/less gear.
Bungie holds down my chair, tip up bag an auger which
sit on top of shanty. I carry the safety spud in hand an bait.
This set up works well on N VT lakes where half mile walk to a1 spot is the norm.

Offline WHITETAIL111

  • Team IceShanty Addict
  • *
  • Posts: 794
Re: JetSled Modification
« Reply #26 on: Dec 16, 2007, 10:51 PM »
Holders look great Karl.  I love seeing peoples mods for their ice boxes/shanties....actually anything to make the trip out onto the ice either easier or more comfortable.  Keep the ideas coming boys!!   ;D
That taxidermy man back home gonna have a heart attack when he see what I bring'em!!
,,

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.