Fly the Team Iceshanty Flag! Iceshanty Proshop
I've used my P1 Rocket a couple times now. Runs and starts just as good as my old HC40, but definitely spins faster. I didn't notice much difference on the breakthrough with that new cast ring on the bottom. To me, the speed increase was worth the upgrade from the HC40 to the P1.
I picked up a P1 this year; but, it's still in the box. As soon as we get some ice and I get it out and punch a few holes, I'll report back.
I've had a Jiffy for many years and have had a Pro 44 for the last three years. I had a couple of buddies buy the Eskimo propane augers last year and they definitely cut faster than my and another buddy's Jiffy's! I saw it too many times to think it was a fluke. As much as I hate to admit it, I've purchased a P1 Rocket and selling my lightly used Jiffy Pro 44.
I emailed them earlier in the year and they were said the 33cc f1 was cutting through as quick as their 71cc in 34" of ice. Now I have f1... need ice!
Bought a F1 two weeks ago. Only 4 inches of ice around here. Have drilled about 40 holes so far and the unit starts and runs effortlessly. Very pleased so far.
Took the P1 out for the first time today and had 10” of good ice to play with. Fired right up in single digit temperature, ran like a beast, and punched holes with no issue. A lot quicker than I expected. I have the 10” auger and wouldn’t think twice about buying it again. Granted, this is based off of a day’s use and less than a couple dozen holes drilled.
Glad you like it. Just remember to let the auger do the cutting and don't push down on it.
Used my P1 for the first time yester. 8 inches of ice, drilled about 15 holes and I am very impressed with it. Spins fast, cuts fast and starts great. It wasn't to cold while I was using it. So I don't know how it will start in 0 degree weather. But I am very impressed with it. I am going from a shark z71 10 and the p1 cuts about as fast.
Bought an F1 last week after my 13 year old Mako cracked the piston. Like the lightweight of it and does cut fast. Have had issues with it icing up really bad but it has been below zero so water doesn't even get a chance to run off. Sprayed and wiped it with White Lithium grease the other day and will try it out this weekend to see if that helps. Starts easy and runs well.
Bought a 10" propane P! Rocket a couple days ago and drilled some holes today for the first time. Have to echo the previous post. Starts great, cuts fast, and noticeably lighter than my 29 year old Model 30 Jiffy.Now only if it lasts 29 years and cuts thousands of holes, I'll be 90.