Legend model 31 gap?

[yukoncornelius]

So i threw the new ripper blades on, getting things ready,

Pulled the plug, and am heading out to grab a new one. I've had this auger through 2 moves now, and can't find my owner's manual. Anyone have plug gap info handy?

[lowrider1340]

Can you gap the one you took out?  It should be the right gap shouldn't it?  Or maybe at the auto parts place where you get a new plug maybe able to tell you.  Or as I always do when all else fails, GOOGLE.

[yukoncornelius]

presumably, the old plug is worn, and gap may be off.....i'm working on google now......

[lowrider1340]

I figured you had thought of that already.  Any luck on Google?

[yukoncornelius]

finally found their website (previous searches had been fruitless for some reason) and am downloading the manual now......need a new gas cap, too (actually need to put a new toggle switch on, too, thanks to a ride in the back of a buddies truck......but i can find that local)

[yukoncornelius]

.030"

[yukoncornelius]

ARRRGGHHH!

I need a new gas cap. Old one lost the rubber vent seal. Jiffy wants $8.95. That's fine.

but they want $10.38 to ship it UPS ground? **censored**!

I'll check the hardware store in Bath. They have a ton of chainsaw/lawnmower parts. Bet one fits.

[mainegator]

Ever have to check the gap while out in the "willies".......  the thickness of a match book cover will usually get things started and running.........   it's usually about.028 to .032 in thickness...........   works every time...............   unless you leave the matches on the kitchen counter.........     

[Hoppes]

Brunswick Lawn and Garden or LL Beans has them for sure.  (Had one in my hand last night)  Cut a piece of gasket material (fiber not rubber) and use that as the gasket seal.  Works better, rubber one just squishes and ends up torn.  I use .22 shells and .38 casings to cut the little buggers out and put some extra in my little ice fishing kit.  Good luck.
Hoppes

[conesca]

Just at Kittery Trading post.  They have gas cap and a tune up kit with instruction oil spark plug and wrench.  They have alot of stuff and worth the trip. 
Frank

[smeltshack]

How much for the kit at Kittery?

A long drive for me so i want to know if its worth the trip