Amsoil in a older Eskimo Auger

[The Beachcomber]

I was going to try Amsoil Sabre Pro in my 7 year old Eskimo Z51 shark.  Should I be concerned about switching oil after all these years? I always used the Jiffy 2 stroke oil and haven't had any problems.  For the guys who use Amsoil do you go with 1:100 ratio of oil to fuel?

[Saskbush]

I used to use the jiffy oil in my jiffy auger for about four years then I switched to amsoil and have never looked back. I mix it at 100:1 and I use it in all my 2 stoke motors. I have been using it for about five years and never had a problem.

[sbfPA_Mike]

Check this forum.. http://www.iceshanty.com/ice_fishing/index.php?board=73.0

Mike

[BlueDevil]

I run my Eskimo Z71 with 100:1 AmsOil Saber and SeaFoam with good success.

[Layne]

Check out Aspen fuel, I run it in my Husky and in my Jiffy with great success. 5 year shelf life, no ethanol, no mixing, no gumming up carbs.. its good stuff!! Both my augers fired right up without issue after sitting all summer.

7 bucks a liter but I only went through 2 or 3 last year in both augers, well worth the extra cost.

[Curley]

I've been running saber for several years now. I do 80 to 1. Just cautious I guess. I was thinking of trying the pre mix but it's a bit pricy. I get a foil pack of saber and when I fill the truck I pump 8 tenths of a gallon. To easy.

[motocross127]

x2 on the aspen that stuff is great.

[Whytie]

Where can you get the aspen fuel? I only burn about 2-3 liters a season in my auger.

[motocross127]

I get the aspen at lambert in regina. I think they have a shop in stoon also

[The Beachcomber]

Yes they have a shop in Stoon

814 47 St E, Saskatoon, SK S7K 0X4
(306) 242-0370

[Blue Hog Ridr]

How would a person find a Lambert in Regina. I have no idea what it is.
Thanks.

[ran7ger]

 i think they`re a small engine shop, should be able to google em or find them in the yellow pages.  seafoam for the win up here.

[Gkomo]

They are at Ross ave and McDonald street in Regina . Same building as napa auto parts .tks

[bigk]

X3 on aspen. Sooner spend a little more on the fuel than cleaning or rebuilding carb.

[Blue Hog Ridr]

Thanks man, I have never heard of that name before but know exactly where that is as I grew up in East View.

I am interested in that product. I have a few other gas mix machines to so sounds good to me.

[indeeptreble]

I have been using saber at 80 to 1 for 5 years now in my 10 year old Jiffy 3 hp I mix a gallon of premium from Shell gas they say no ethenol in premium but who knows. I have never had to de carbon my jiffy. I have seen that aspen type premix at lowes in Regina