Click here to order with free shipping.Team Iceshanty Patches! Most iceshanty boards are represented
I did, well changed the nozzle, filter, cleaned the chamber before that, changed the eye that sees the flame, cleaned the induced draft fan tube censor thing, whats left? Primary control, right? it runs 23 out of 24 hrs, but on the second call for heat, the short cycle, it cuts out and back in, then trips the reset, if I'm fishin, it will be out all day, I live alone.
sounds like the primary control is on its way out or the control sensor is bad. is your reset button on your primary control box?
does it light on the first click if so it should not click no more . so that would tell me that its not sensing that its lit
onida thread has turned into plumbing/heating class. It will do one full cycle, then the water goes threw the zones, when it does the next short cycle to re heat that water is where the trouble happens, it will click indused fan pre starts then burner, but sometimes and not always say a few times a day, the second click happens, or a third.... burning stops for 3 seconds, hear a click burning starts again, after the cycle is complete, the reset trips. man i wish i was there i no i can hook it up it could be a fuel problem maybe sucking air at first its one of those thing you need to trouble shoot on site. its somthing stupid and small. did you try cleaning the sensor with some sand paper. if i only could see what unit you have some of them have a long probe that sense s the water temp which sends a signal back to the control box. i just fixed one and it was doing pretty much the same thang as yours
onida thread has turned into plumbing/heating class. It will do one full cycle, then the water goes threw the zones, when it does the next short cycle to re heat that water is where the trouble happens, it will click indused fan pre starts then burner, but sometimes and not always say a few times a day, the second click happens, or a third.... burning stops for 3 seconds, hear a click burning starts again, after the cycle is complete, the reset trips.
nice meeting you today Bart even though you wouldn't let me catch any fish