Please welcome Eyoyo Underwater Fishing Cameras.https://amzn.to/3siEgXn
Anyone have pics/plans from this thread?
These are some pictures of a new shack I built this year. It's 4'x8', 6' high at the eave, and 6'9" at the peak. I was wanting to try to build a hardside that was under 200lbs (and it is well under, less than 175, way under 175!) I can easily lift one end or turn the whole thing on its side by myself!I started out with a 4'x8' (5/8" thick) plywood floor with 2x4 runners and 2x3 cross supports.Note, the square plywood with the circle cut-out. That is for the 5 gallon bucket with the bottomcut out to put into ice to stop the drafts. I also added UHMW plastic to the skis.(Image removed from quote.)Then I insulated the floor.(Image removed from quote.)I built the frame using 3/4" x 3/4" pine. I had to pre-drill and counter-sink every hole to prevent the wood from spilting. I also used wood glue on every joint.(Image removed from quote.)I then "filled each opening with polystyrene foam. This also added lateral support to the frame.(Image removed from quote.)I added the coroplast on the exterior and then added the reflective tape. I also put some aluminum flashing around the bottom for protection from ice and snow. I used angle aluminum to finish all the edges. I painted the roof black too.(Image removed from quote.) Mainedog.