Top
Proshop
Sponsors
News:
Fly the Team Iceshanty Flag!
Iceshanty Proshop
Home
Forum
Help
Login
Register
IceShanty.com's Ice Fishing Community
»
Ice Fishing Tips -Check your local regulations!
»
Tipups
»
Rigging Tip Ups
Print
Pages: [
1
] |
Go Down
Author
Topic: Rigging Tip Ups (Read 2271 times)
Marauder2008
Team IceShanty Regular
Posts: 110
Fish On
Rigging Tip Ups
«
on:
Dec 30, 2020, 09:47 AM »
So I've been ice fishing for a while now and I enjoy the tip up game. I like to think I am fairly well versed in the use of my rail-type tip ups and I've gotten to know the functions pretty well. I'm looking to fine tune my set ups. A few years ago I switched to light (12lb) steel leaders and my thought process was to prevent bite offs as I usually target Pike/Tiger Musky on my tip ups. However, I noticed my bite frequency dropped dramatically. So this year I decided to change things up again. I always use 30lb , noncoated braid for my main line. I purchased 40lb monofilament leader and plan to tie this directly to my main line using surgeon knots. I went with the heavier mono for a few reasons. 1 being the mono being less visible than the steel, and 2 being heavier mono to hopefully prevent the bite offs. I plan on having to use a light sinker to keep the bait down, considering the steel leaders would sink. Typically I use large to medium shiners or fatheads (depending on what is available). Any further input on fine tuning this rig would be welcome! Thanks all!
Logged
"When hell freezes over, I'll fish there too."
trapper2000
Team IceShantyholic
Posts: 8,620
Re: Rigging Tip Ups
«
Reply #1 on:
Dec 30, 2020, 10:05 AM »
i use invisa leaders by south bend they are ultra thin wire i use the 8 inch with a mono leader to my main line ..... i also use the old fashion ....what we use to call english hooks where you use a large needle just under the skin of the shiner thread the shiner on the hook with built in steel leader...... they both work well for me then again i never met a northern pike that earned a doctorate in leader identification
Logged
Fishmongerlyndon
Team IceShanty Regular
Posts: 112
Re: Rigging Tip Ups
«
Reply #2 on:
Dec 30, 2020, 10:12 AM »
i like using 20 to 40lb flourocarbon as it is more abrasion resistant and usually a lower diameter than mono. but other than that seems like you've got it dialed.
Logged
Shepbc
IceShanty Rookie
Posts: 25
Re: Rigging Tip Ups
«
Reply #3 on:
Dec 30, 2020, 10:31 AM »
I use 20 pound flourocarbon for my tip up leaders. I typically use number 6 treble hook, then I use a fast clip with a 3-4 inch length fireline and a number 8 treble hook for my stinger. I hook larger treble under the dorsal fin of the golden shiner and put the fast clip on the eye of the larger treble hook and then put one of the number 8 hooks in the shiners mouth. This rig has given me an excellent hook up rate it allows me to set the hook quickly. I typically have a 4 x 4 block of a closed cell foam in my coat pocket with a bunch of pre-tied stinger hooks should a replacement be needed. Hope this helps
Logged
Sm94427p
IceShanty Rookie
Posts: 75
Re: Rigging Tip Ups
«
Reply #4 on:
Dec 30, 2020, 11:32 AM »
I use about 2 feet of 6 or 10 pound fluoro connected to a size 14 treble. Hooks when fishing tip ups remember less is more the fish have all the time in the world to inspect the bait
Logged
river_scum
Team IceShanty Maniac
Posts: 4,969
hook n cook
Re: Rigging Tip Ups
«
Reply #5 on:
Dec 30, 2020, 06:09 PM »
don't forget attractor like blades rattles and scent. they will up tour catch.
Logged
real fishermen don't ask "where you catch those"
OANN the real story
- member here since -2003- IN.
panfishman13
Team IceShanty Maniac
Posts: 2,385
Re: Rigging Tip Ups
«
Reply #6 on:
Dec 30, 2020, 09:49 PM »
what kinds of scent should i look at? i can only use dead bait here in idaho, so anything to up my chances would be awesome. mostly target bass, but occasionally walleye as well.
Logged
Tmuskie
Team IceShanty Maniac
Posts: 1,096
Re: Rigging Tip Ups
«
Reply #7 on:
Dec 31, 2020, 01:26 PM »
My Tip-Up set up is. Tip-Up braided line around the spool, about 100yrds. I tie that to a large snap swivel. I pretie my leaders. 12 to 24 inches long. Power swivel on one end hook on the other. Above the hook I add 3 beads, clevice with a blade and a bead or two above that.
Good luck. Stay safe.
Logged
There's a hole in the Ice, Dear Liza, Dear Liza.
There's a hole in the ice, Dear Liza, a hole.
Well fish it, Dear Henry, Dear Henry, Dear Henry
Well fish it Dear Henry. Dear Henry, Fish it.
Print
Pages: [
1
] |
Go Up
IceShanty.com's Ice Fishing Community
»
Ice Fishing Tips -Check your local regulations!
»
Tipups
»
Rigging Tip Ups
Iceshanty
|
MyFishFinder
|
MyHuntingForum
Contact
|
Disclaimer
|
Privacypolicy
|
Sponsor
© 1996- Iceshanty.com
All Rights Reserved.