Top
Proshop
Sponsors
News:
Visit the
Team Iceshanty Proshop
Home
Forum
Help
Login
Register
IceShanty.com's Ice Fishing Community
»
IceShanty Main
»
General Ice Fishing Chit Chat
»
Eskimo Auger Gear Removal
Print
Pages: [
1
] |
Go Down
Author
Topic: Eskimo Auger Gear Removal (Read 574 times)
TenE307
IceShanty Rookie
Posts: 82
Eskimo Auger Gear Removal
«
on:
Jan 30, 2013, 08:43 PM »
Im trying to clean out all the grease in the gears and not sure how to remove the gears. Any help would be great. Thank you!
Logged
Gambler
Team IceShanty Regular
Posts: 451
Ice Fishing Rulez!
Re: Eskimo Auger Gear Removal
«
Reply #1 on:
Jan 30, 2013, 08:48 PM »
just lift out.
Logged
Take Care and God Bless
Rick
TenE307
IceShanty Rookie
Posts: 82
Re: Eskimo Auger Gear Removal
«
Reply #2 on:
Jan 30, 2013, 08:58 PM »
Its not coming out. Ive tried to pry under the top gear and nothing. I just noticed a c-clip in the lower gear.
Logged
Gambler
Team IceShanty Regular
Posts: 451
Ice Fishing Rulez!
Re: Eskimo Auger Gear Removal
«
Reply #3 on:
Jan 30, 2013, 09:01 PM »
Yes but the top gear must come off first. I don't remember having to do anything special to mine to pull the gears. That top gear has to come straight off because the bottom of the gear is a shaft and is in a bearing.
Check out page 8.
http://www.geteskimo.com/foundations/DownloadCenter/downloadpopup.asp?file=OMBARRACUDA_9003B06 R8.26.05.pdf
Logged
Take Care and God Bless
Rick
dbike988
Team IceShanty Regular
Posts: 236
Re: Eskimo Auger Gear Removal
«
Reply #4 on:
Jan 30, 2013, 09:22 PM »
I wouldn't bother taking them out, just take a screwdriver or something and pull a little grease out around the edges of the gear. By the looks of your first post, most of the excess has already spewed out. Just pull out a few gobs to be sure.
Logged
TenE307
IceShanty Rookie
Posts: 82
Re: Eskimo Auger Gear Removal
«
Reply #5 on:
Jan 30, 2013, 09:33 PM »
Thanks for the link. I want to take it out so I can clean it all up before I put new grease in it. It must be tight in the bearing below the gear. If I cant get it out I will just get as much as I can out.
Logged
TenE307
IceShanty Rookie
Posts: 82
Re: Eskimo Auger Gear Removal
«
Reply #6 on:
Jan 30, 2013, 09:45 PM »
Thanks for the help. Got the gears out! Had to just wiggle them out a little. Thanks again!!!
Logged
Gambler
Team IceShanty Regular
Posts: 451
Ice Fishing Rulez!
Re: Eskimo Auger Gear Removal
«
Reply #7 on:
Jan 31, 2013, 05:08 AM »
The owners manual says to use 4oz of grease and cautions not to over fill.
MAINTENANCE
1. The gear case has 4 oz. of grease installed at
the factory. It is recommended that once a year
the gear case be split and the grease level
checked. Add grease only if level of grease is
below top of the gears. DO NOT OVERFILL.
Logged
Take Care and God Bless
Rick
Print
Pages: [
1
] |
Go Up
IceShanty.com's Ice Fishing Community
»
IceShanty Main
»
General Ice Fishing Chit Chat
»
Eskimo Auger Gear Removal
Iceshanty
|
MyFishFinder
|
MyHuntingForum
Contact
|
Disclaimer
|
Privacypolicy
|
Sponsor
© 1996- Iceshanty.com
All Rights Reserved.