Auger transportation

[aacosta]

Looking at ways to attach electric auger to atv. Any suggestions? Is an auger boot better than a rack or the other way around?

[sunniewally]

digger anchor auger mount. https://www.fleetfarm.com/detail/digger-anchor-auger-carrier/0000000054741?gclid=Cj0KCQiAsqLSBRCmARIsAL4Pa9Tq0tjRFnDl9jNscn5tXeGZiBl26X1eNEUHxGZ7VxdGIZZmitLobrUaAhp7EALw_wcB

[hardwater diehard]

Double rifle mount grip...nestle the auger in-between the mounts...let the auger handles rest on the rack of the ATV...

http://www.cabelas.com/product/Kolpin-Rhino-Grip-XL-Gun-Mounts/747085.uts?productVariantId=1660627&WT.tsrc=PPC&WT.mc_id=BingPLA&WT.z_mc_id1=02811329&rid=20&msclkid=ba5d8149d594132311afdb01331fc222&gclid=CPjC-v6ttNgCFe-7swodlD0GiA&gclsrc=ds

[mealworm]

I just bungee the auger to my racks. Works great no carrier needed

[guthook1]

I have the Koplin  single rifle mounts that I use for my IONX - currently they are set up on the tail end of my Skidoo Tundra Long Track .  Previously I had them on my ATV for rifle season.

[Oldbear]

Kolpin gun rack on the front of the atv also.  Might break off if you really went flying or drove over a plowed field but  it hasn't yet.

[Ice Scratcher]

The right sized piece of PVC pipe cut long ways can accommodate the handle well..

<°)))>{

[aacosta]

I've read the kolpin gun mounts can be loose or break? Ice scratcher you have a pic of your pvc idea? Thanks all

[Ice Scratcher]

Just as an example of where I used a piece of PVC cut in half, front center on my sled, holds my clam plate handle. Shaft in this case is supported by the bench when en route..




<°)))>{