Pages: [1] |   Go Down

Author Topic: Frabill Commando Max to Commando?  (Read 1098 times)

Offline Greg2ha

  • Team IceShanty Maniac
  • **
  • Posts: 2,433
  • Pollock $1.49 a pound!!!!!!!!!!!!!!
Frabill Commando Max to Commando?
« on: Mar 02, 2014, 11:13 AM »
Quick questions here. Is it my understanding that the only difference between the Max and the original is the top cover? If so can you buy the framework to remove top and make it a standard model? I think this would just be the frames and hardware cause of already having seat and swivel. I can't find a parts section on Frabill that gets down to the nuts and bolts parts. This is a nice unit but i would be pulling by hand at least for the next year or two, as i have plans for a new boat this year and it would not go over too well with momma.


Greg
Logged
Fish on!

Offline toofuss

  • Team IceShanty Maniac
  • **
  • Posts: 1,183
  • stick 'em
Re: Frabill Commando Max to Commando?
« Reply #1 on: Mar 02, 2014, 08:14 PM »
I am gonna do the same thing with mine. I am planning on calling frabill tomorrow and finding out.
Logged

I was on a bus and just happened to be sitting on a news paper. This guy came up and asked. "Are you reading that ?"
I said  yes, stood up, turned the page and sat back down.

Offline Greg2ha

  • Team IceShanty Maniac
  • **
  • Posts: 2,433
  • Pollock $1.49 a pound!!!!!!!!!!!!!!
Re: Frabill Commando Max to Commando?
« Reply #2 on: Mar 03, 2014, 10:40 AM »
I,M thinking two braces and a plate on top plus hardware. But do let me know what you find out.
Logged
Fish on!

Offline toofuss

  • Team IceShanty Maniac
  • **
  • Posts: 1,183
  • stick 'em
Re: Frabill Commando Max to Commando?
« Reply #3 on: Mar 03, 2014, 01:49 PM »
Ok just got off the phone with frabill. The part # for the seat frame kit is 611560. Cost is $56.60 plust shipping. This kit is the brackets, mounting plate, and hardware. Everything we need to make the conversion.
Logged

I was on a bus and just happened to be sitting on a news paper. This guy came up and asked. "Are you reading that ?"
I said  yes, stood up, turned the page and sat back down.

Offline Greg2ha

  • Team IceShanty Maniac
  • **
  • Posts: 2,433
  • Pollock $1.49 a pound!!!!!!!!!!!!!!
Re: Frabill Commando Max to Commando?
« Reply #4 on: Mar 03, 2014, 02:03 PM »
Thanks toofuss!
Logged
Fish on!

Offline Greg2ha

  • Team IceShanty Maniac
  • **
  • Posts: 2,433
  • Pollock $1.49 a pound!!!!!!!!!!!!!!
Re: Frabill Commando Max to Commando?
« Reply #5 on: Mar 16, 2014, 09:08 AM »
My vex ultra pack won't fit with max cover on.
Logged
Fish on!

Offline toofuss

  • Team IceShanty Maniac
  • **
  • Posts: 1,183
  • stick 'em
Re: Frabill Commando Max to Commando?
« Reply #6 on: Mar 20, 2014, 11:29 AM »
my pro pack fits under the seat
Logged

I was on a bus and just happened to be sitting on a news paper. This guy came up and asked. "Are you reading that ?"
I said  yes, stood up, turned the page and sat back down.

Offline Greg2ha

  • Team IceShanty Maniac
  • **
  • Posts: 2,433
  • Pollock $1.49 a pound!!!!!!!!!!!!!!
Re: Frabill Commando Max to Commando?
« Reply #7 on: Mar 22, 2014, 01:43 PM »
I have my LX-3 on a pro-pack 2 and and 18 on the ultra pack. 18 won't fit. :'( I am still thinking about the conversion though.
Logged
Fish on!
Pages: [1] |   Go Up
 


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.