where do i get bulk line?

[nhpikeking]

im buying 6 new heritage tip ups without line im wondering where do i buy bulk tip up braid the most i can find is 150 yard spools deffinatly not enough

[WhackMaster]

i get mine on ebay

[james]

I bought some 1200' spools from fish307.com a couple of years ago.
james

[slip_knot]

I saw some some 1000 foot spools at AJs earlier this year. Give him a call and see if he still has some.

[KissMyBassNH]

some baitshops will spool them right up for ya

[deerme]

http://40uptackleco.com/

check out the line toward the bottom...

[Bailbuster]

im buying 6 new heritage tip ups without line im wondering where do i buy bulk tip up braid the most i can find is 150 yard spools deffinatly not enough

I bought bait at Steve's Bait in North Hartland today ,he had 4- 1000ft bulk spools of 36# green ,and I think 1 of 18#.

[stevesb]

Thanks for the plug, Bailbuster!  We do have bulk line .  Spools are 1000 YARDS (3000 feet).  We have 1 black and 2 green (36#) and
1 green 18#.  Usually have more but icefishing is winding down. 

We also carry all of the 40-Up tip-ups  and the replacement parts for them.

Got plenty of shiners for Pike, Walleye, Bass.  We keep bait in stock year 'round.

Huge selection of leadhead and floating jig heads. 

We're new to iceshanty.com but are enjoying all the information that is shared. 

Were fortunate enough to have our customer catch the #2 all-time pike in the state of VT!  SBS

[Thumber]

Nice to have a you on the boards Steve.

[deerme]

Thanks for the plug, Bailbuster!  We do have bulk line .  Spools are 1000 YARDS (3000 feet).  We have 1 black and 2 green (36#) and
1 green 18#.  Usually have more but icefishing is winding down. 

We also carry all of the 40-Up tip-ups  and the replacement parts for them.

Got plenty of shiners for Pike, Walleye, Bass.  We keep bait in stock year 'round.

Huge selection of leadhead and floating jig heads. 

We're new to iceshanty.com but are enjoying all the information that is shared. 

Were fortunate enough to have our customer catch the #2 all-time pike in the state of VT!  SBS

steve, would you happen to carry any of these parts:

Need some parts for a couple 40-up ICEMAN Tip-Ups.  Looking for the long screw that the spool slides onto as well as the nut at the end and the washers in the middle.  Will also need replacement drag springs and screws and wing-nuts for where the two pieces of wood attach to the main beam.

I checked KTP and they do have some 40-up parts, but none for the ICEMAN model.

thanks!

[stevesb]

steve, would you happen to carry any of these parts:

Need some parts for a couple 40-up ICEMAN Tip-Ups.  Looking for the long screw that the spool slides onto as well as the nut at the end and the washers in the middle.  Will also need replacement drag springs and screws and wing-nuts for where the two pieces of wood attach to the main beam.

I checked KTP and they do have some 40-up parts, but none for the ICEMAN model.

thanks!

Yes, we have the ICEMAN parts.  I noticed that you said you had emailed 40-UP, would probably be quicker to get them from
him....he is better set up for mailorder.  If you don't have any luck, we can definitely help you out!  SBS

[nhpikeking]

hey steve i was wondering if you had jaw spreaders up there as kool as all my pike scars look id like to cut down on getting bit by everything i catch