MyFishFinder.com Just like iceshanty but warmer
I've been cooking on mine for years now.(Image removed from quote.)Bought an aluminum mesh screen at HD for paint rolling in a bucket and fastened it on. Just keep the foil pans forward so the handle won't melt.Gary
I am going to Wallyworld right now to get a small aluminum paint roller thingy!!! I am going to rip the little "fabbed" hot dog wires off my big buddy immediately and put on a grill!!! Thanks fellas!!!
Goterdone!!! Thanks alot!!! I just finished, I even made a little heat shield for the handle. I had no intention of removing the factory wire guard, I had some rigged up coat hanger wires that was my previous mod for cooking hot dogs. That's what I was removing. Great Mod, thanks...
I dig it I'm gonna have to so the same. We used to use a metal pizza sheet on coleman lanterns. drill a hole through the middle of it and set it between the top screw and nut over the dome. Now that don't use lanterns I'll be warming up hot wings Mr Buddy style.
To you guys that did the painter grill mod, did you have to cut any of the original wire cage on the Mr Buddy little heater? I just ordered one and wasn't sure if I had to modify anything to make it fit.
drill out the small hole on the pol end of the hose (where it hooks to the 5 - 100lb tank) (Image removed from quote.) allow more propane flow thru the hose to the built in regulator thus allowing quicker start up and if you had issues with running it on high without it going out now there is a mod that works too
No mods to the heater itself but I did trim down the width of the painters screen about and inch or so. It just has a crimped edge you can pry open and then crimp back in place. There are pics in this thread of what I did that should show it pretty well.
Thanks great ideas be modifying my bud
How did you make the heat shield? Got a pic? I made this one for my buddy last year...works great! Smitty
had a pair of needle nose pilers frezze on me so i jammed em in the girl a few minutes later they sizzled when i touched em to snow ... so it should work good to make grilled cheese lol
those little racks yall built would work sweet to put a can of spagetti o's on lol