Top
Proshop
Sponsors
News:
MyFishFinder.com
Just like iceshanty but warmer
Home
Forum
Help
Login
Register
IceShanty.com's Ice Fishing Community
»
Ice Fishing Tips -Check your local regulations!
»
Equipment
(Moderator:
Bean
) »
Vexilar DD-100 Depth and battery gauge install on FL-18 question
Print
Pages: [
1
] |
Go Down
Author
Topic: Vexilar DD-100 Depth and battery gauge install on FL-18 question (Read 1522 times)
Winds-of-Thor
IceShanty Rookie
Posts: 44
Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
on:
Jan 22, 2021, 01:30 PM »
I need a little hep installing a Vexliar DD-100 depth and battery gauge on a FL-18 flasher.
For hooking up the red power wire the directions say to attach it to the battery's positive post and a piggyback clip is added to make it easy. For the life of me I don't see how it fits together.
There isn't enough room to slide the piggyback tab in underneath the yellow connecter.
Logged
DR.SPECKLER
Team IceShantyholic
Posts: 9,137
find your own fish..
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #1 on:
Jan 22, 2021, 01:37 PM »
Unhook red from battery and slip pigback in the clip back to battery.or disconnect red battery wire.put on the single red then hook the 2 red wire onto the pigback of single red wire.
Logged
Winds-of-Thor
IceShanty Rookie
Posts: 44
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #2 on:
Jan 22, 2021, 01:38 PM »
There's not enough space to slide it in.
Logged
DR.SPECKLER
Team IceShantyholic
Posts: 9,137
find your own fish..
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #3 on:
Jan 22, 2021, 01:44 PM »
Ok so you cannot take of the positive battery cable off the battery,put the dd wire on the battery then slide the double red wire onto the pigtail?
Logged
Winds-of-Thor
IceShanty Rookie
Posts: 44
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #4 on:
Jan 22, 2021, 01:58 PM »
No, it won't fit. The slot is only big enough for one or the other.
Logged
Winds-of-Thor
IceShanty Rookie
Posts: 44
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #5 on:
Jan 22, 2021, 01:59 PM »
I'm theory it seems like that's exactly how it should fit together, but there's only room for one. The slot is too slim.
Logged
Winds-of-Thor
IceShanty Rookie
Posts: 44
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #6 on:
Jan 22, 2021, 02:07 PM »
This slot which I have now roughed-up a little will not allow the two tabs below to fit when they are stacked.
Logged
Winds-of-Thor
IceShanty Rookie
Posts: 44
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #7 on:
Jan 22, 2021, 02:41 PM »
I got it done. I called Vexilar and they had me going in 5 minutes. Turns out I had to pull the yellow connector off of the red piece and piggyback to that connection. All good. Thanks for trying to help, Dr. Speckler!
Logged
hardwater diehard
Iceshanty Militia
Team IceshantyInsanity
Posts: 12,486
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #8 on:
Jan 22, 2021, 02:43 PM »
Logged
Give a man a fish he eats for a day .Teach a man to ice fish he has an obsession for a lifetime
DR.SPECKLER
Team IceShantyholic
Posts: 9,137
find your own fish..
Re: Vexilar DD-100 Depth and battery gauge install on FL-18 question
«
Reply #9 on:
Jan 22, 2021, 02:44 PM »
Nice.i was wondering.none of my vexilars even have that fuse block right on the battery like that.
Logged
Print
Pages: [
1
] |
Go Up
IceShanty.com's Ice Fishing Community
»
Ice Fishing Tips -Check your local regulations!
»
Equipment
(Moderator:
Bean
) »
Vexilar DD-100 Depth and battery gauge install on FL-18 question
Iceshanty
|
MyFishFinder
|
MyHuntingForum
Contact
|
Disclaimer
|
Privacypolicy
|
Sponsor
© 1996- Iceshanty.com
All Rights Reserved.