Is a lazer 7 inch hand auger actually 7 inches?

[Mrpike1973]

Just wondering I heard the mora 7 inch is 7.5 but when I measured it shows 7. Curious if the lazer 7 is 7 inches or the 8 actually smaller than 8 inches.

[Agronomist_at_IA]

Just wondering I heard the mora 7 inch is 7.5 but when I measured it shows 7. Curious if the lazer 7 is 7 inches or the 8 actually smaller than 8 inches.

When I've had the flat blade shavers a 7in was 7in. & an 8in was 8in. I don't think the guy knew what he was talking about when he made the statement that it was 7.5in.

Lazer a are 7in and 8in.

[Ice Scratcher]

I think if you measure the 7" Mora by holding the tape on the blades, following the V shape, instead of straight across, you might get 7.5".. Maybe that's how he arrived at that measurement?

<°)))>{

[Agronomist_at_IA]

I think if you measure the 7" Mora by holding the tape on the blades, following the V shape, instead of straight across, you might get 7.5".. Maybe that's how he arrived at that measurement?

<°)))>{

Exactly, what I was thinking.

When measuring the hole it cuts you measure from outside edge to outside edge.....straight across....

[lefty2053]

Exactly, what I was thinking.

When measuring the hole it cuts you measure from outside edge to outside edge.....straight across....

This is how I measured the Nero 7" Which comes out to 7 3/8".

[Agronomist_at_IA]

This is how I measured the Nero 7" Which comes out to 7 3/8".

No suprise....I'm pretty sure a 7in mora isn't 7.5in. If I had mine yet I would measure.

[Mrpike1973]

Thanks for the clarity all. yes it did not make sense being 7.5

[Agronomist_at_IA]

This is how I measured the Nero 7" Which comes out to 7 3/8".

A Nero probly is 7 3/8" a mora is not 7.5in.