Please welcome Eyoyo Underwater Fishing Cameras.https://amzn.to/3siEgXn
K-drill has chipper blades meant for opening old holes which a mora can’t do , it’s also designed not to catch as you break through drilling the hole & punches though a clean hole( aka no sharp edges around the hole ). I have used the laser on my Milwaukee and you better have a tight gripe on your drill as it will catch on a break through . I for one love the weight & the free blade sharpening for life . Not trying to start a pee match just stating some facts as I have used mora & laser set ups . Nils blades were just too expensive & hard to find around here so I ruled it out , this will be the 3 year on the K-Dill
Are you guys seriously saying that you think drilling one inch per second of ice is slow?
A sharp shaver blade will ALWAYS cut faster than a chipper blade. The payback you get from losing the speed on the KDrill is being able to overcome sandy/dirty ice, opening old holes, overlapping holes, clean break through and free lifetime sharpening. YMMV, but in my experience with shaver blades you will probably be getting new blades every 2-3 years and in some cases more often than that. The cost will add up for sure, especially with a Nils. and don't forget if you ding up a shaver blade, youk might not be able to cut any holes no matter how hard you try, so you best have a backup.
A sharp shaver blade will ALWAYS cut faster than a chipper blade. The payback you get from losing the speed on the KDrill is being able to overcome sandy/dirty ice, opening old holes, overlapping holes, clean break through and free lifetime sharpening. YMMV, but in my experience with shaver blades you will probably be getting new blades every 2-3 years and in some cases more often than that. The cost will add up for sure, especially with a Nils. and don't forget if you ding up a shaver blade, youk might not be able to cut any holes no matter how hard you try, so you best have a backup. I've actually seen better than 1" per second on my tests with the KDrill. Last year I was doing 15" of ice in 11 seconds with DeWalt 996. But again, a sharp shaver will be even faster than that.
Which video? Are you talking about my KDrill video? If so... Which hole didn't break clean? It's like butter.
Probably this one...https://www.iceshanty.com/ice_fishing/index.php?topic=349521.0<°)))>{