Visit the Team Iceshanty Proshop
Just bought my first Eskimo, a Z51 Shark 8". Glens hooked it up big time!!!!!!!!!!!!.So, now I want my cool FOEAO red emblem to sport. Dont suppose someone could tell me how to do that or where to get it!
schreeet, thanks big red.................
I just got a 10" z51 on the weekend, I can't wait to start drilling some holes!
Here it is:Depends on how picky you are about your engine. Start it, just let it idle for the first 10 minutes or so, then shut 'er down and let it cool off. Re-start, and slowly bring revs up, then down, slowly advancing up to Midrange. Shut off; let cool down. Repeat, slowly advancing engine to WOT. Remember to let it idle as long as it was at higher rpms; if you ran it at high revs for 15 seconds, let it drop to idle for at least that long. Proper break-in sets the stage for the future of your engine....no reason to pound the heck out of it right away. Run it at the PROPER oil specified ratio with a good (Viper) 2 stroke oil for Air-cooled engines.
do I really have to cudle with it to break it in .