Author Topic: Otter monster box  (Read 204 times)

Offline Isaac

  • IceShanty Rookie
  • **
  • Posts: 2
Otter monster box
« on: Nov 07, 2019, 07:24 PM »
Looking for anyone that tried to duplicate the quick attachments on the rhino/otter monster box.  My current enclosed trailer is to narrow to drive the wheeler in with the auger shield attached to the box. I thought if I could replicate the Male quick connect I could remove from box and hang on the side of the trailer.  Any tips or suggestions appreciated.


Offline Fisherman 1

  • Team IceShanty Addict
  • *
  • Posts: 949
  • Fish..the other white meat
Re: Otter monster box
« Reply #1 on: Nov 07, 2019, 08:18 PM »
Looking at your photo it looks like you just "hang" the other half onto those tracks, right?  Then nothing more than a couple of pieces of  oak or maple and a bit of handy work with the table saw and a dado blade could make them in a hurry.   Then use some heavy screws to mount them inside your trailer.  I would mount the new ones at a point that the bottom of the auger shield would be resting on the floor to alleviate any extra weigh bouncing around.

 



Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.