Author Topic: Fan options for my Eskimo Evo 2 thermal  (Read 385 times)

Offline Walleyes at heart

  • IceShanty Rookie
  • **
  • Posts: 27
Fan options for my Eskimo Evo 2 thermal
« on: Feb 09, 2019, 11:54 PM »
Gents ,
I got a new Eskimo Evo 2 thermal , I'm going to be heating it with a propane tank and hose to a buddy heater
I'm looking for ideals and options for a small fan , with or without a light , something small that will help blow the heat back down and keep it moving around good inside the shelter

I was thinking maybe a small 12 volt rechargeable battery with a wire to a fan and then clips ,

Can you share what you have for your flips shelters ,

Offline Deal Ninja

  • Iceshanty Militia
  • Team IceShanty Maniac
  • *
  • Posts: 1,543

Polar Bird 3T, Eskimo EVO 1it
8" K-Drill, 8" Nils Arctic Trekker, Milwaukee Mud Mixer, Milwaukee 2704-22, Clam Plate, Adapters to make everything work with everything. lol
Marcum LX-7s (2) Dakota Lithium powered

Offline Mizayikaa

  • Team IceShanty Regular
  • ***
  • Posts: 200
  • Jack Torrance wasn't an ice fisherman.
"Do not tell fish stories where the people know you...but particularly, don't tell them where they know the fish."    S.C.

Offline midwest_rodworks

  • Team IceShanty Regular
  • ***
  • Posts: 122
Re: Fan options for my Eskimo Evo 2 thermal
« Reply #3 on: Feb 10, 2019, 08:05 PM »
The Clam fan is almost identical/is identical to the one listed on Amazon in the post above.  I went with the Clam fan because it includes a 12V plug to run off of a power box/flasher battery.
"Balance in all things"


Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996-
All Rights Reserved.