Author Topic: reading a old black flasher  (Read 251 times)

Offline bayonne

  • Team IceShanty Addict
  • *
  • Posts: 703
reading a old black flasher
« on: Feb 05, 2019, 04:45 PM »
i have a old zercom clear water classic  been using it and read my jig real good but still learning how to read it any help would be appreciated

Offline DR.SPECKLER

  • Team IceShantyholic
  • ***
  • Posts: 5,431
  • find your own fish..
Re: reading a old black flasher
« Reply #1 on: Feb 05, 2019, 05:33 PM »
Old goat knows alot about the old flashers.

Offline Kevin23

  • Team IceShantyholic
  • ***
  • Posts: 6,666
Re: reading a old black flasher
« Reply #2 on: Feb 05, 2019, 07:34 PM »
Theres nothing else to it. You'll see your jig and you will see fish. Its a grayscale unit so the darker the line the bigger or closer to right below your transducer the fish is.

Offline dogfish

  • Team IceShanty Addict
  • *
  • Posts: 852
  • Walk softly and carry a big gaff
Re: reading a old black flasher
« Reply #3 on: Feb 07, 2019, 11:18 AM »
I still use my Clearwater classic.
It is all about the sensitivity knob on the bottom.  Pull it out and the flasher lights up (if you did not know that)
You just need to play with the sensitivity knob until you can see you jig and then you are set.
When the going gets weird the weird turn pro.

Offline Jiggerdoodle

  • IceShanty Rookie
  • **
  • Posts: 94
Re: reading a old black flasher
« Reply #4 on: Feb 08, 2019, 11:34 AM »
I use one still.  A guy had some recondition ones on eBay for $50 each.  Don't need one with all the bells and whistles.  It shows my lures and fish that's all I need.  Just crank up the gain.  I watch the screen and when a fish comes near I pay more attention to my rod tip. 

 



Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.