Author Topic: Sleeper Shack Build  (Read 10849 times)

Offline Raquettedacker

  • IceShanty Mod Team
  • Team IceshantyInsanity
  • *
  • Posts: 11,709
Re: Sleeper Shack Build
« Reply #120 on: Apr 30, 2019, 07:50 AM »
That looks really nice. 
Did you think of the shrink wrap they use on boats for the roof? Saw someone do it and it worked great..     jmo..
Strangers stopping strangers just to shake there hand.
         The successful life were living has us feuding like the Hatfields and McCoys...


Pro Staff Member "Team Loser"

Offline WalleyeBird

  • Team IceShanty Regular
  • ***
  • Posts: 131
Re: Sleeper Shack Build
« Reply #121 on: May 01, 2019, 07:50 PM »
Walleyebird I thought you might use rubber roofing to eliminate the seam where roof changes pitch. I'm looking forward to seeing photos of the completed shanty in use next ice fishing season.
Steve

Of course! I hope to use it a lot more! Just picked up a generator off of marketplace. A generac p2200. Supposedly only a couple hours on it for $200. So I think weíll set the rattle reels and watch movies a lot this winter! Just gotta make it comfortable and enjoyable for her and the puppy to come along.

My biggest question is whether or not to panel the inside of it. Iím trying to stay as light as possible but she really likes the finer things in life. Haha.

That looks really nice. 
Did you think of the shrink wrap they use on boats for the roof? Saw someone do it and it worked great..     jmo..

Yeah Iíd just be worried about the long term durability of it. Plus I donít really have a source for it at all. Figure by doing it all summer I can work my way through each process over time and not worry quite as much about the cost of each part.

Offline WalleyeBird

  • Team IceShanty Regular
  • ***
  • Posts: 131
Re: Sleeper Shack Build
« Reply #122 on: May 09, 2019, 11:17 AM »
Got another day to work on the shack. Put in drip edge around the whole thing (noticed the old frame and runners were holding moisture in the seam). Also added another window and sided one side. Wound up filling the cut off rafter spot with a ripped 1x4 board.




Offline WalleyeBird

  • Team IceShanty Regular
  • ***
  • Posts: 131
Re: Sleeper Shack Build
« Reply #123 on: Sep 11, 2019, 10:20 PM »
Well Iím fonna drag this one back ttt. Iíve started working on her again after a very busy summer. I wound up finishing the siding and roof trim before tarping it and leaving it. 

So my most pressing issue was how to haul it (unable to move it in the driveway all summer wasnít ideal). I wound up custom ordering a galvanized steel trailer locally. I am SUPER impressed with the build quality of these trailers if anyone is interested. It is essentially a 7x12 with a torsion axle built by G-Force trailers in Manawa WI.

Who wouldíve guessed twice the shack would weigh twice as much! Currently looking for an electric winch.


Finally loaded up and out of my driveway 6 months later!


Just the trailer. I am a steel guy. If you like aluminum, then good for you. I saw galvanizing as a happy medium.


Next Iím replacing the plywood door to something that wonít warp when it gets wet (and let the cold in), gluing the rubber roof on, and installing the new empire furnace!

Offline WalleyeBird

  • Team IceShanty Regular
  • ***
  • Posts: 131
Re: Sleeper Shack Build
« Reply #124 on: Sep 15, 2019, 05:25 PM »
Got around to finishing the roof trim and replaced the door.

Trim is standard L8 fascia. Had to go that tall since I cut off the old eaves and had to cover that 4Ē of board.

Door was just a different color steel sheet I had laying around that I screwed to a little wood frame.

Caulked all the gaps and protrusions in the roof today too. Epdm is getting glued tomorrow.




Offline WalleyeBird

  • Team IceShanty Regular
  • ***
  • Posts: 131
Re: Sleeper Shack Build
« Reply #125 on: Sep 17, 2019, 07:45 PM »
Well the epdm is down. First day was latex glue for the base of everything. Due to the compound angle at the peak I had to seam it.

To do the seam I overlapped it about a foot and used the multi purpose adhesive (contact cement). It says to buy their special splicing tape to do seams but that stuff is just way too expensive. This stuff grabbed like crazy so Iím not too worried. Just to add extra security I added a 12Ē cover strip over the seam. Crappy thing is that doing it myself and not knowing what I was doing led me to lay it pretty crooked. Oh well. It wonít leak anyway.

I will say the latex adhesive is much more forgiving if anyone is wondering for future reference.

Seam with super crooked cover strip.


Just the seam


Offline WalleyeBird

  • Team IceShanty Regular
  • ***
  • Posts: 131
Re: Sleeper Shack Build
« Reply #126 on: Sep 22, 2019, 09:45 PM »
Wound up gluing all the edges down to the fascia with the multi purpose glue. Should make setting the edge trim straight a breeze since I wonít have to be stretching anything. That was a nightmare the first time when nothing was glued.

Does anybody know what this glue is based out of though? I got a little messy and would like to clean it up.

Says itís solvent based, but dipping the brush in gasoline did not thin it at all. Kept the brush workable though anyway.





What is the multi purpose adhesive based out of?


Offline WalleyeBird

  • Team IceShanty Regular
  • ***
  • Posts: 131
Re: Sleeper Shack Build
« Reply #127 on: Oct 11, 2019, 11:49 AM »
Well Work has continued.
I used the standard termination bars they sell at menards all the way around. Found that acetone cleans up the excess adhesive easy enough (takes the paint off too if you scrub too hard).

After finishing the termination bars I took it for its first trip at highway speeds. I will say this thing pulls awesome! Much more confident pulling now. The snowmobile trailer and square face was scary to reach 45 mph. Now 70 is no problem. I really hope to take this shack some cool places this year!

Just ordered led lights for inside and out. A thermostat for the empire heater.

Will post pics after furnace and lights are installed.

 



Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.