Author Topic: lx-7 shallow water  (Read 434 times)

Offline icecaptain14

  • Team IceShanty Regular
  • ***
  • Posts: 144
lx-7 shallow water
« on: Dec 11, 2017, 08:07 PM »
been running the lx-7 in more than 10 ft of water cant seem to fine tune it for shallow water it has all the updates any ino or help would be good before I decide to buy a vx-1

Offline squ1rr31_

  • IceShanty Mod Team
  • Team IceShanty Maniac
  • *
  • Posts: 1,372
  • Addicted to freezing.
Re: lx-7 shallow water
« Reply #1 on: Dec 11, 2017, 08:10 PM »
One of the things they said would help was to put the ducer in the water just enough to cover the bottom.

Offline Fishtrekker

  • IceShanty Rookie
  • **
  • Posts: 63
Re: lx-7 shallow water
« Reply #2 on: Dec 12, 2017, 05:23 PM »
First of all, if you aren't running firmware version 5.10, upgrade on their support website. There was some limitations with older firmware versions that have been resolved in the latest firmware. Secondly, make sure your ducer is just below the water line in the center of the hole, this will help with a return. Third, manual or manual dynamic under range. Then adjust your sensitivity and target adjust. If you aren't getting the return you are looking for switch to Gain 2 under sonar mode and repeat adjusting your settings.

Offline hardwater diehard

  • Team IceShantyholic
  • ***
  • Posts: 6,329
Re: lx-7 shallow water
« Reply #3 on: Dec 19, 2017, 03:08 PM »
Give a man a fish he eats for a day .Teach a man to ice fish he has an obsession for a lifetime


Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996-
All Rights Reserved.