The board sponsored by:

Author Topic: Rod Building question  (Read 277 times)

SALMONEMIA

  • Team IceShanty Maniac
  • **
  • Posts: 2,263
Rod Building question
« on: Aug 21, 2017, 05:45 PM »
http://www.jannsnetcraft.com/ice-rod-parts/netcraft-xts-ice-rod-handle-kit.aspx

Does anyone on here build there own rods? Im looking at this handle, curious if the bottom end screws off so a spinning reel can be inserted then tightened over that? Not sure as Ive never built or customized rods before. Thanks
Salmonemia

rdhammah

  • Team IceShanty Maniac
  • **
  • Posts: 2,606
Re: Rod Building question
« Reply #1 on: Aug 22, 2017, 09:16 AM »
I would assume that the top is what screw off to attach the reel. email  Jann's or call and ask for their rod building dept. I have called and they are very helpful.

midwest_rodworks

  • IceShanty Rookie
  • **
  • Posts: 63
Re: Rod Building question
« Reply #2 on: Aug 22, 2017, 09:26 AM »
The top 1/3 of that will unscrew and be the lock nut on your reel seat.
"Balance in all things"

SALMONEMIA

  • Team IceShanty Maniac
  • **
  • Posts: 2,263
Re: Rod Building question
« Reply #3 on: Aug 23, 2017, 12:49 PM »
Thank you both.  I called but was closed im impatient lol
Salmonemia

 


Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.