The board sponsored by:

Author Topic: Welcome Northern Fabrication Solutions  (Read 4382 times)

redneckfisherman5

  • IceShanty Rookie
  • **
  • Posts: 56
Re: Welcome Northern Fabrication Solutions
« Reply #40 on: Jan 01, 2017, 06:18 PM »
What do you figure your new demo one will weigh? I'd love to get a 7x12 built on a single axle got a base price and weight for something like that also? Top notch aluminum bobhouses that's for sure👍🏻
Trout -the real pink meat

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #41 on: Jan 05, 2017, 04:29 AM »

 Thanks! That demo model the orange one, is built on a 3 place 2 axle snowmobile trailer. It is 8.5 x 16 feet plus the bump out and the v-nose. It will be on the heavier side at around 1500 lbs. my guess. Most of our builds are significantly lighter than the one. We can build you whatever you like, just give us a call and we can go over your ideas and we will do the best we can for you.

Thanks, Jason
that is thinking with your dipstick......jimmy

mowbizz

  • Team IceShanty Regular
  • ***
  • Posts: 331
Re: Welcome Northern Fabrication Solutions
« Reply #42 on: Jan 05, 2017, 06:46 PM »
Thanks! That demo model the orange one, is built on a 3 place 2 axle snowmobile trailer. It is 8.5 x 16 feet plus the bump out and the v-nose. It will be on the heavier side at around 1500 lbs. my guess. Most of our builds are significantly lighter than the one. We can build you whatever you like, just give us a call and we can go over your ideas and we will do the best we can for you.

Thanks, Jason

Jason, check your PM's please!

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #43 on: Jan 05, 2017, 08:04 PM »

Sorry bud... Message sent
that is thinking with your dipstick......jimmy

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #44 on: Jan 12, 2017, 03:10 PM »
 some more updated pics as we get closer too better weather!













The red one we delivered today, it looked awesome! the customer was blown away, The sled we made a while back but just got an order for 3 more, and the inside pics are of some more progress we made on the interior of our demo shack for this year, the propane heater/fireplace is unbelievable!

that is thinking with your dipstick......jimmy

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #45 on: Jan 12, 2017, 03:18 PM »

 one more pic of the cooking area going in..... hope to finish by next weekend

that is thinking with your dipstick......jimmy

DConICE

  • Team IceShanty Addict
  • *
  • Posts: 529
Re: Welcome Northern Fabrication Solutions
« Reply #46 on: Jan 12, 2017, 03:19 PM »
Very Impressive...  must be hard to run for a flag sitting in jigging chairs like those.

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #47 on: Jan 12, 2017, 03:22 PM »

 that's why we put the shack in a good place and set the flags up inside! you should see everyone jump when the flag springs!

jason
that is thinking with your dipstick......jimmy

JIGGIN-

  • Team IceShanty Maniac
  • **
  • Posts: 4,310
  • Go Go Get Em!
Re: Welcome Northern Fabrication Solutions
« Reply #48 on: Jan 12, 2017, 03:40 PM »
Outstanding Jimmyrig!

Cheers to you guys.

Keep up the great work and keep posting. Love it!

NH Trout Fisherman

  • IceShanty Mod Team
  • Team IceShanty Maniac
  • *
  • Posts: 4,064
Re: Welcome Northern Fabrication Solutions
« Reply #49 on: Jan 12, 2017, 04:56 PM »
Yup... Definitely getting more and more serious about getting one of these for next year.

Now that my son is older and My wife comes along with us I need a nice warm/comfortable place for them to relax in between fishing.

I currently either use My truck or portable but I can definitely see My Family in one of these next season.  :)
 

800stealth

  • Team IceShanty Maniac
  • **
  • Posts: 1,717
Re: Welcome Northern Fabrication Solutions
« Reply #50 on: Jan 12, 2017, 04:58 PM »
Wow, those are some really nice setups.
And the amount that you guys give up for derby raffles to help the communities is amazing... You guys truly deserve all the success that you earn.

DConICE

  • Team IceShanty Addict
  • *
  • Posts: 529
Re: Welcome Northern Fabrication Solutions
« Reply #51 on: Jan 12, 2017, 05:22 PM »
that's why we put the shack in a good place and set the flags up inside! you should see everyone jump when the flag springs!

jason

Classic!!!  Though the word "shack" just doesn't do these justice.

celtbass

  • Team IceShanty Regular
  • ***
  • Posts: 149
Re: Welcome Northern Fabrication Solutions
« Reply #52 on: Jan 12, 2017, 05:57 PM »
Fantastic of you guys to donate these fine works of art to raise money for local good cause...  I can't Imagine a word to describe what it would be like to win one of those suckers!
Let it freeze

mowbizz

  • Team IceShanty Regular
  • ***
  • Posts: 331
Re: Welcome Northern Fabrication Solutions
« Reply #53 on: Jan 12, 2017, 07:13 PM »
Beautiful! I don't see the heated garage for the wheelers though... ;)

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #54 on: Jan 13, 2017, 07:41 PM »






A couple more pics of our shack... Can't wait to take it out and fish!
that is thinking with your dipstick......jimmy

ice fisher

  • Team IceShanty Regular
  • ***
  • Posts: 195
Re: Welcome Northern Fabrication Solutions
« Reply #55 on: Jan 25, 2017, 08:37 AM »
 Could  you tell  me what brand of heater is in the bump out ? Where are they sold  .Thank you

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #56 on: Jan 25, 2017, 08:52 AM »
Could  you tell  me what brand of heater is in the bump out ? Where are they sold  .Thank you

it is a Dickinson marine heater... we have been installing them in a lot of our builds, they work great! we order them direct typically. not cheap but worth it, and safe!
that is thinking with your dipstick......jimmy

jimmyrig

  • Team IceShanty Addict
  • *
  • Posts: 703
Re: Welcome Northern Fabrication Solutions
« Reply #57 on: Jan 25, 2017, 09:41 AM »
 here are some recent projects.... figured I would post for people to see, we have been busy and we are very appreciative of all our customers. very excited about the upcoming derbies and our 2 donation shacks being raffled. still time buy tickets!

-NFS

custom Ice shack with fold out sides not shown


Meredith rotary donation shack


loading the mule for a delivery


nice silver shack with bump out


silver  6x 10


installing heat



freedom fire dept. donation raffle shack


shop dog millie enjoying the 2017 demo


led lights installed


solar panel install


front view ready to hook up and go




Emily enjoying the sleeping arrangements in a recent build



delivering a big wheelhouse at night on lake ossipee


nice wheelhouse build with interior finish work



heater running


custom tow sled



that is thinking with your dipstick......jimmy

PoolGuy

  • Team IceShanty Maniac
  • **
  • Posts: 1,449
  • Hello my name is Bill and I'm an ice fisherman !!
Re: Welcome Northern Fabrication Solutions
« Reply #58 on: Jan 25, 2017, 10:30 AM »
WOW!!  Great workmanship on all projects jimmy.. the bunk beds are a great option  thanks for sharing the pictures

Digs

  • Team IceShanty Addict
  • *
  • Posts: 509
Re: Welcome Northern Fabrication Solutions
« Reply #59 on: Jan 25, 2017, 01:44 PM »
Will tickets be available at the derbys?
Every fish is a good fish!

 


Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.