Author Topic: @ The Cabin 2019/2020 Edition  (Read 72696 times)

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #960 on: Aug 30, 2019, 11:08 PM »
Dave, when you selected the stove, did you do any calculation of cabin volume vs. heat output, etc?

Looking forward to the report.

Steve the stove is rated for up to 2,000 square feet. My place is quite a bit smaller than that. It's taking the chill of on low with minimal ceiling insulation so it should be great when it's all insulated.

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #961 on: Aug 30, 2019, 11:09 PM »
I'm interested in knowing the BTU rating of your stove.  It must be extremely efficient with how the outlet is zigzagged, definitely minimal heat loss up the chimney with that design.

Just under 60,000 BTU Chris.

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #962 on: Sep 02, 2019, 03:23 PM »
Finished off the fresh air supply for the stove.
Got to do some testing out and it draws perfectly!!!
Need to try some different pellets as the one's I have are softwood pellets and they don't burn hot enough for my liking.
They also produce too much ash which impedes the quality of the burn.





Got the stand pipes for the sprinklers installed as well.
There's one at each end of the roof.


Offline Chris338378

  • Team IceShantyholic
  • ***
  • Posts: 6,451
Re: @ The Cabin 2019/2020 Edition
« Reply #963 on: Sep 02, 2019, 07:34 PM »
I wonder how much hotter the hard wood pellets are going to burn compared to the soft wood pellets.  Also curious as to how long before you have to refill the hopper. 

Offline Raquettedacker

  • IceShanty Mod Team
  • Team IceshantyInsanity
  • *
  • Posts: 11,685
Re: @ The Cabin 2019/2020 Edition
« Reply #964 on: Sep 03, 2019, 06:10 AM »
Looks great Dave.
Hard wood pellets will burn better.
We use to sell a brand from Canada but no longer can get..  It is called Ambience,  Valfei super premium pellets..
Strangers stopping strangers just to shake there hand.
         The successful life were living has us feuding like the Hatfields and McCoys...


Pro Staff Member "Team Loser"

Online ActiveTrapChecker

  • Team IceShanty Addict
  • *
  • Posts: 880
Re: @ The Cabin 2019/2020 Edition
« Reply #965 on: Sep 03, 2019, 07:38 AM »
Looks great Dave.
Hard wood pellets will burn better.
We use to sell a brand from Canada but no longer can get..  It is called Ambience,  Valfei super premium pellets..

x2 on the hardwood. Significantly more heat than the blends

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #966 on: Sep 04, 2019, 03:55 PM »
I talked to my buddy in Alaska who was running one of these in his mom's old place and he says he was running the hardwood pellets too.
I'm having to add a 40# bag per day which is pretty damn good.
The high ash content of the pellets I have sucks though.

Offline matzilla

  • Team IceShanty Maniac
  • **
  • Posts: 1,657
Re: @ The Cabin 2019/2020 Edition
« Reply #967 on: Sep 05, 2019, 01:44 PM »
I talked to my buddy in Alaska who was running one of these in his mom's old place and he says he was running the hardwood pellets too.
I'm having to add a 40# bag per day which is pretty damn good.
The high ash content of the pellets I have sucks though.

what is the cost of pellets up there? hardwood would be $4-5/40lb bag

Catchin' Fish

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #968 on: Sep 05, 2019, 07:36 PM »
what is the cost of pellets up there? hardwood would be $4-5/40lb bag

The softwood ones I got work out to $3.80  a bag US
The 5 bags of hardwood pellets I bought to try today were $5.21 US a bag
Once I figure out what pellets work the best I'm sure I can get a better price in bulk.

Offline Chris338378

  • Team IceShantyholic
  • ***
  • Posts: 6,451
Re: @ The Cabin 2019/2020 Edition
« Reply #969 on: Sep 06, 2019, 07:57 AM »
The few people that I know who burn the pellets buy them by the ton and it ends up being a good amount cheaper for them.  When the pellet stoves first came out it was on the news that dealers ran out of pellets because the companies didn't make enough but I haven't heard anything like that since.  Probably the biggest pain for you with the stove is going to be hauling the bags up to the cabin and getting rid of the ashes but that's a small price to pay for decently cheap heat.

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #970 on: Sep 06, 2019, 10:07 AM »
The few people that I know who burn the pellets buy them by the ton and it ends up being a good amount cheaper for them.  When the pellet stoves first came out it was on the news that dealers ran out of pellets because the companies didn't make enough but I haven't heard anything like that since.  Probably the biggest pain for you with the stove is going to be hauling the bags up to the cabin and getting rid of the ashes but that's a small price to pay for decently cheap heat.

It's no issue getting the pellets up there if you haul in the winter. ;)
This weekend I'll have to lug them up the hill by hand.
The skid of softwood pellets I got for $350 CAD off my landlord here in town.
Went to Canadian Tire yesterday and they actually have 3 different types of hardwood pellets.
Don't know if they give a bulk discount though. I will have to see.

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #971 on: Sep 07, 2019, 05:51 PM »
I'm interested in knowing the BTU rating of your stove.  It must be extremely efficient with how the outlet is zigzagged, definitely minimal heat loss up the chimney with that design.

Just under 60,000 Chris.

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #972 on: Sep 10, 2019, 06:46 PM »
Forgot to post that I went out last weekend but didn't get too much accomplished.
Woke up Saturday morning with a bad migraine which didn't let up until mid afternoon.
At 3:30 I got going and managed to get my plumbing vent installed and got some holes drilled in the last headers that need to be spray foamed. Also got my scaffolding assembled so I can do the spray foam and insulate the vaulted ceiling.
Sunday I moved about 2,000#'s of cedar from the kitchen to the loft.
That was about all.

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #973 on: Sep 15, 2019, 07:27 PM »
Good weekend @ the cabin.
Here's a good pic of my plumbing vent (capped off until the rest of the plumbing is in) and the rear standpipe for my sprinkler.



Got the service entrance for my solar panel wiring installed.
The conduit runs all the way to the basement.  :)

Still need to install the flashing on the roof.
My supplier was closed for inventory most of last week.





Finished the spray foam work on the rest of the window headers and got some wiring and more wall insulation done.
I now have lights in the entrance, bedroom and washroom. :)

Offline beerduck

  • Team IceShanty Addict
  • *
  • Posts: 762
  • beer and fish nut
Re: @ The Cabin 2019/2020 Edition
« Reply #974 on: Sep 16, 2019, 05:58 PM »
keep the pics coming

Offline jedhead

  • Team IceShanty Regular
  • ***
  • Posts: 159
Re: @ The Cabin 2019/2020 Edition
« Reply #975 on: Sep 16, 2019, 07:33 PM »
Looking good! What did you use for piping in the walls for the sprinkler system on the roof? Working on a job I Did not install today for an outdoor horse riding area and the exposed galvanized is fine to the sprinkler heads,but the black iron nipple adapter is taking a beating after only 2 years. Changing out all the 3 inch PVC fittings as the guy used waste, not pressure PVC fittings for the installation, now leaking. Keep up the good work!

Offline Drifter_016

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 5,325
Re: @ The Cabin 2019/2020 Edition
« Reply #976 on: Sep 16, 2019, 10:15 PM »
Looking good! What did you use for piping in the walls for the sprinkler system on the roof? Working on a job I Did not install today for an outdoor horse riding area and the exposed galvanized is fine to the sprinkler heads,but the black iron nipple adapter is taking a beating after only 2 years. Changing out all the 3 inch PVC fittings as the guy used waste, not pressure PVC fittings for the installation, now leaking. Keep up the good work!

2" galvanized pipe 24" long to galvanized 2" to 1 1/4" reducer.
On the inside it's 2" pressure pipe PVC all the way to the inlet from the pump where it transitions to 2" galvanized through the wall. Fittings are all schedule 40 PVC.  Here it is running down from the attic. The ABS is plumbing venting from the bathroom.

I'm not a plumber, but I did stay in a Holiday Inn Express last night!!!    :roflmao: :roflmao: :roflmao:



Online mr.clean

  • Team IceShantyholic
  • ***
  • Posts: 5,085
  • new windsor,ny.
Re: @ The Cabin 2019/2020 Edition
« Reply #977 on: Sep 17, 2019, 09:40 AM »
Thank you for the update and photos. Like other I.S. members enjoy watching your cabin build progress over the past few years.
 Steve

 



Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.