Author Topic: (Moved to Auger section)  (Read 304 times)

Offline AaronMN

  • IceShanty Rookie
  • **
  • Posts: 23
(Moved to Auger section)
« on: Jan 22, 2014, 09:14 PM »
I just purchased an older Strikemaster Cobra 3HP for a pretty good deal.  It was running a little rough - I took the carb off to give it a good cleaning.  If you look at the attached photo, I need a little help with knowing what I'm looking at.  My initial thought put the "2" as the low speed adjustment, and "3" as the high speed.  As I have taken it apart, I'm wondering if "1" is one of those two as "3" doesn't have any (that I can tell) tiny outlets. 

Do I need to pop off the silver cap on "1" to get at one of the adjustments?

Many thanks.



 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.