The Iceshanty Ice Auger Board is sponsored by
Nils Master Authorized Sharpening Service

Author Topic: Jiffy age by serial number?  (Read 19670 times)

Offline Drift Dodger

  • Team IceShanty Addict
  • *
  • Posts: 506
Jiffy age by serial number?
« on: Dec 31, 2009, 10:26 AM »
Does anyone know whether the year of manufacture can be determined from the model/serial number? I have an old Jiffy 30 handed down from my father, and just want to pinpoint exactly how old it is.
Garmin EchoMAP Plus 95sv, Garmin EchoMAP CHIRP 53dv, Garmin GT8HW-IF, Garmin GT10HN-IF, DeWalt DCD999B, K-Drill 7.5"

Offline mech12

  • IceShanty Rookie
  • **
  • Posts: 85
Re: Jiffy age by serial number?
« Reply #1 on: Dec 31, 2009, 01:07 PM »
post the number of engine.... example  av520- 677311f- 04752    the first  digits of the last set of numbers will give an indication... above example   would be a  1970 1980 1990 2000. now if the carburator has adjustable mixture screws you can eliminate 1990 and 2000  by them epa restricted carbs were on these.....

Offline WYIfish

  • Team IceShanty Maniac
  • **
  • Posts: 1,595
  • Ice fishing a sport, or just reason to buy stuff?
Re: Jiffy age by serial number?
« Reply #2 on: Jan 03, 2010, 04:59 PM »
Does anyone know whether the year of manufacture can be determined from the model/serial number? I have an old Jiffy 30 handed down from my father, and just want to pinpoint exactly how old it is.
Call jiffy's 800 number (jiffyonice.com has it) and they can tell you over the phone after you read them the serial number. Takes about three minutes.  My old one is 28 years old!  NO, it's not for sale!
Thread killer

Offline Drift Dodger

  • Team IceShanty Addict
  • *
  • Posts: 506
Re: Jiffy age by serial number?
« Reply #3 on: Jan 07, 2010, 08:26 PM »
I emailed their address [email protected] with the serial numbers and received a reply within a couple days. My household operates two Jiffy 30s, one manufactured in 1988 and the other 1998.
Garmin EchoMAP Plus 95sv, Garmin EchoMAP CHIRP 53dv, Garmin GT8HW-IF, Garmin GT10HN-IF, DeWalt DCD999B, K-Drill 7.5"

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.