Author Topic: Beaver Dam Ice Traps  (Read 2048 times)

Offline oldfox

  • Team IceShanty Maniac
  • **
  • Posts: 1,384
Beaver Dam Ice Traps
« on: Feb 22, 2005, 03:25 PM »
Does anyone know how to refill the trip wire tubes on the Beaver dam (Artic Fisherman) traps, with out sending them back to the factory? ???

Offline FullTmeDad

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 1,166
  • Back in Michigan!
Re: Beaver Dam Ice Traps
« Reply #1 on: Mar 02, 2005, 07:47 AM »
Last season I bought a cable lube injector for my boat cables and it works very well. I have also seen cable lubricant injectors in bike shops for lubricating shifter cables. They run about twelve dollars in bike shops. With the right lubricant you should have no problem at all refilling the tubes. Hope that helps.
FTD

Offline oldfox

  • Team IceShanty Maniac
  • **
  • Posts: 1,384
Re: Beaver Dam Ice Traps
« Reply #2 on: Mar 02, 2005, 11:51 AM »
Last season I bought a cable lube injector for my boat cables and it works very well. I have also seen cable lubricant injectors in bike shops for lubricating shifter cables. They run about twelve dollars in bike shops. With the right lubricant you should have no problem at all refilling the tubes. Hope that helps.
FTD
Thanks FTD...that maybe a solution to my problem....any idea how the cap is attached?...press fit?

Offline FullTmeDad

  • Iceshanty Retired Mod
  • Team IceShanty Maniac
  • **
  • Posts: 1,166
  • Back in Michigan!
Re: Beaver Dam Ice Traps
« Reply #3 on: Mar 03, 2005, 07:53 AM »
It's a clamp that injects through a concealed needle. You clamp it on your cable(tube) and attach the lube onto the clamp. Then it injects the lube through the side of the cable housing, it works great!
FTD

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.