Pages: [1] |   Go Down

Author Topic: Clam poles icing up.  (Read 1080 times)

Offline kingfshr16

  • Team IceShanty Addict
  • *
  • Posts: 687
  • Hardwater Nut!
Clam poles icing up.
« on: Feb 21, 2006, 12:02 PM »
 Ok so the poles on my clam 2000 ice up and its really hard to open or wont open at all until it warms up, do you guys have this problem and does anyone have a fix for this? I was wondering if i greased them up maybe that would work? Any input is appreciated.
Logged
Jason

Offline LoneWolf

  • Tournaments/Mod Team
  • Team IceShanty Maniac
  • *
  • Posts: 4,182
  • Hardwater Fanatic! >))))>
Re: Clam poles icing up.
« Reply #1 on: Feb 21, 2006, 07:55 PM »
Take the poles apart and wax them up ! I use whatever car wax is handy .. this year its Mothers. Apply it a little on the heavy side. Let it dry and buff. You'll see a big difference. Good luck !
Logged
Those who are brave are free ..

Offline tip-uptwo

  • Team IceShanty Maniac
  • **
  • Posts: 1,934
Re: Clam poles icing up.
« Reply #2 on: Feb 23, 2006, 07:48 AM »
Wax  ;) Just a bit will do the job!
Logged
Andrew

Offline jepik

  • Team IceShanty Regular
  • ***
  • Posts: 296
Re: Clam poles icing up.
« Reply #3 on: Feb 25, 2006, 08:30 AM »
has anybody tried taking the poles apart and with a dremel, lightly sand the inside of one and the outside of the other...then apply the wax..I dont know if it will help, but it should.....
Logged

Offline LoneWolf

  • Tournaments/Mod Team
  • Team IceShanty Maniac
  • *
  • Posts: 4,182
  • Hardwater Fanatic! >))))>
Re: Clam poles icing up.
« Reply #4 on: Feb 27, 2006, 06:33 PM »
That would help if there were burrs, etc. in there and that's if they were near the end of the pole. Mine were clean and the wax alone works.  ;)
Logged
Those who are brave are free ..
Pages: [1] |   Go Up
 


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.