The Iceshanty Ice Auger Board is sponsored by
Nils Master Authorized Sharpening Service
Pages: [1] |   Go Down

Author Topic: Help older Eskimo auger  (Read 2799 times)

Offline Crazy-Joe

  • Team IceShanty Regular
  • ***
  • Posts: 282
Help older Eskimo auger
« on: Jan 16, 2014, 05:11 AM »
I just pick up a Eskimo Ice auger Model # 2000-3.I am looking for part info and year.I have sarched the web with no luck.
Here;s a couple pics.Any help with be appreciated.  ;D

Logged
If it was that easy,everyone would do it!

Offline Chris338378

  • Team IceShantyholic
  • ***
  • Posts: 6,688
Re: Help older Eskimo auger
« Reply #1 on: Jan 16, 2014, 09:15 AM »
Did you try calling Eskimo?  What motor is on it and what parts do you need?  You could try searching the internet for the motor brand and model to see if you can find parts for the motor.
Logged

Offline BlueDuck

  • Team IceShanty Maniac
  • **
  • Posts: 1,237
Re: Help older Eskimo auger
« Reply #2 on: Jan 16, 2014, 09:33 AM »
I would call or email Eskimo first.  I have always found them very helpful.  If they don't  have what you need, they will probably put you on the right trail to finding it.
Logged

Offline Crazy-Joe

  • Team IceShanty Regular
  • ***
  • Posts: 282
Re: Help older Eskimo auger
« Reply #3 on: Jan 16, 2014, 10:38 AM »
Just really need the carb adjustment.
Logged
If it was that easy,everyone would do it!

Offline Rebelss

  • Iceshanty Militia
  • Team IceshantyInsanity
  • *
  • Posts: 16,106
  • Inventor of Minnow Magic American Patriot
Re: Help older Eskimo auger
« Reply #4 on: Jan 16, 2014, 10:42 AM »
That's a Tecumseh TC-3 engine. Bullet-proof and easy to get parts for. It's the infamous "one-armed bandit" from the mid 60's to early 70's. Any small engine shop can order parts/rebuild that carb for ya.

Logged
“The mass of men live lives of quiet desperation”  Thoreau
Pages: [1] |   Go Up
 


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.