Author Topic: Run & Gunner  (Read 862 times)

Offline Bassassins

  • IceShanty Rookie
  • **
  • Posts: 42
Run & Gunner
« on: Feb 24, 2013, 07:15 PM »


Bassassins are proud to introduce a new breed of ice fishermen. These custom builds are laid out for maximum performance and efficiency.

Our first contender is:

The Run & Gunner

We have chosen this class as our intro because we believe it’s the most demanding but under the right conditions, the most exciting build.

Lightweight and agility form the base for hit and run tactics, fast moving, quick striking, until he finds actively feeding fish.

Only carrying minimum gear, bare to the bone, constantly on the go… It’s a challenging task but when well executed it can be tremendously rewarding, laying the foundation to future success for seasons to come.

 

Drill, Flash, Slush, Catch, Move

In a nutshell, these are our most important tools

Auger
Flasher
Slusher
Pliers \ Pocket knife
The auger, 8” if we are targeting trophy pike and walleye but the bigger diameter will also slow you down significantly. In general a 6” drill will get the job done more efficiently. Don’t forget to plunge your hole when you are done drilling, this will eliminate pesty slushing and will save essential time.

The R&G’s best friend is a flasher, instantly knowing your depth with comparison to charts and your gps will tell you if your in the right spot or not. We don’t spend more than a few minutes over one hole. In general when there is fish close by they will key in to your offerings and show up on your screen, if it stays empty move on.

A good slusher comes in handy on those super cold days. We prefer the metal kind, since they can be used to quickly pop open older holes, also once frozen over they can withstand a beating on the ice to free them up again.

Pliers are gold, unhooking fish as quickly as possible in frigid conditions is most important, delicate fins covered in water, exposed to wind-chill will freeze to death within seconds. Fingers get cold fast and vital sensitivity goes first, pliers get the job done regardless.

My trusty old pocket knife will take care of dissecting minnows into bite sized little pieces. A pair of sharp clippers will make short process of heavy braid and steal leaders, making retying a breeze.

Always dedicate different pockets to different tools, this way you know where everything is at all times. When you have to think fast these little tweaks will make all the difference in the world.

Again, the less time is wasted with scrambling and fumbling, the more the R&G will fish and catch .

 

Finding Structure

This is the key to the game, always be looking for the usual suspects,

Points
Breaks
Humps
The targeted species will dictate which one we will fish in particular but burn those 3 in to your mind and you can’t go wrong.

Shallow bays, away from the current or with close access to deeper water or both, are always a safe bet for any species.

Searching for and fishing on their feeding grounds is the main objective, eliminating less fruitful waters and staying on the fish is the ultimate goal. Knowing what fish like doing where and when will help establish useful patterns.

 

Do Your Homework!

Google maps, Navionics and Anglers Atlas are great tools to scout out an area before hand. Mark potential hot spots in your GPS. My Iphone is the ultimate multi tool, it has everything we need under one hood, paired with a waterproof case it becomes the teams tactical unit.

Electronics should always be attached, those numb hands become notoriously clumsy ,a simple lanyard is the winning ticket here. We have seen it over and over again, things just naturally have the tendency to slide down into the abyss. A 2 dollar investment will save yourself cries of despair.

If no technology is available or in case it fails, use your surroundings to your advantage. Carefully study shore lines and guestimate how they could continue under water. A pit stop at the local bait shop and a little chit chat with the owner can eliminate hours of searching. Always be prepared, you can never know to much!

 

Clothing


The R&G doesn’t use portable shelters or huts, good clothing is the most important aspect to help brave the elements.

wind and water proof outer shells
warm and breathable inner layers
Being able to quickly undress and peel back when we drill a bunch of holes is vital. Sweat is your biggest enemy, staying dry and warm your main concern. An added bonus to this lifestyle is the amount off drilling that keeps the body exercised and the blood flow going.

Waterproof gloves are a must, when things get hectic at the hole and you have to reach in for some reason you can do so confidently. Paired with a set of warmers they can mean the difference between do or die.

A pair of knee guards, water resistant boots, a warm hat, polarized shades and a lightweight back pack will put the finishing touches on our R&G.

 

Tackle

The R&G carries an elite selection of trusted weapons of confidence, there is no room on board for half the bait shop so downsizing is key. Our standard selection always contains ( from light to heavy ):

Tiny tubes and jigs
Williams wabler’s in silver/ blue or gold
Swedish Pimples
Buckshots
Blades in perch and shad
Raps in perch and shad
heavy macho minnows
large spoons and tubes
Additional gear

Swivels
spare hooks and trebles
stingers in various sizes
pretied heavy mono and steal leaders
split shots
As for bait, frozen minnows are the perfect choice here as there is no room for bulky buckets and such. Instead easy to handle ziplock bags with small army’s of leftover minnows are much more appropriate.
The R&G is usually equipped with a medium heavy and a light rod, both rigged accordingly. A light fluo carbon line in the 6-8 lb range is well suited.

In addition the R&G can carry a Tipup, when he works longer on a particular area deploying a second line will double the odds. If time is available than most likely the Tipup will produce the bigger and better fish. It often attracts fish from further away, a seemingly free meal can sometimes fire them up and a suspended shiny silver minnow is visible from quite some distance underwater.

 

Conclusion

The key elements for this build are staying on the move and being as light weight as possible. Spending a day out on the ice jumping from hole to hole, exploring new territories, finding new honey spots has its perks. Fortune favours the bold!

Ice safety is at the utmost importance, venturing into an unknown area should never be taken lightly and always be handled with care. The R&G never goes out alone and always comes prepared.

We will never lose the fear and respect for the ice, We treat 4” the same way as 15” and don’t take it for granted. Ice conditions can change drastically fast. Keeping track of ice thickness can help point out weaker spots,.

The R&G’s ability to conquer great distances allows him by default to run into more fish. You never now, you just might walk right into a monsters backyard…there is only one way to find out and its the Run and Gunners way.

Its not for the faint hearted and willingly enduring long, cold hours outside is not everyone’s cup of tea. For those who will though, it can hold adventures and treasures and the experience has taught that it always seem to be well worth the hardship.

So don’t just sit there this winter, gear up light, go on a hunt and make your own luck.

 

Run and Gun lads
www.thebassassins.com
www.thebassassins.com
www.facebook.com/TheBassassins
Pro Staff - FISHBUM Outfitters, Angler's Choice, Streamside, Militant Outdoors, The Swedish Pimple, KAMAKAZI

Offline Ironeagle

  • Team IceShanty Addict
  • *
  • Posts: 991
Re: Run & Gunner
« Reply #1 on: Feb 24, 2013, 08:37 PM »
very nice. i do this allot. it can be stressful way to fish but can make or break a day sometimes and sometimes ya break!
That simple and to the point info rite there!  :thumbsup:

i always like your photos as well. keep em coming!


     
 As soon as that sun hits the water.. All Hell is gona break loose!
Punch holes and find schools

Offline Pickeralpicker91

  • Team IceShanty Regular
  • ***
  • Posts: 303
Re: Run & Gunner
« Reply #2 on: Feb 24, 2013, 08:59 PM »
I like this.  I try to do the same but a man can only drill so many holes with an 8 inch hand auger through 16 inches of ice.

Offline hnd

  • Team IceShanty Maniac
  • **
  • Posts: 1,806
Re: Run & Gunner
« Reply #3 on: Feb 25, 2013, 08:07 AM »
i put my phone in a snack baggie. perfect size and can still use it through the plastic.  poor man's run and gunner

Offline BaitBucket

  • Team IceShantyholic
  • ***
  • Posts: 5,457
Re: Run & Gunner
« Reply #4 on: Feb 25, 2013, 09:08 AM »
1 man lightweight flip over should be on the list. Great to have on those crappy days, and light enough to not slow you down. My clam trapper is 27lbs empty.

I consider myself this type of fisherman. Moving inactive tilts every 30 mins till i start to get on them, then move all of them to the same area.

Jigging in between, giving each hole about 3 minutes.

My Ion is great for this type of fishing. Fast, quiet, and lite.

Having multiple rods with different jigs is a must as well. Another added bonus of the flip over. Space to carry everything in between jigging holes.
Official Member of The G.I.T.s, Gods In Training 1/2014
The fishing was good; it was the catching that was bad.

Offline primepin65

  • Team IceShanty Addict
  • *
  • Posts: 613
Re: Run & Gunner
« Reply #5 on: Feb 25, 2013, 01:19 PM »
It looks great and is very informative but one thing is bothering me. Steel leaders, not "steal" leaders. I would be wondering who took my stuff!

Otherwise a great post! Keep it up!
"The mountain without is merely a crutch to help us deal with the mountain within."

Offline matt12

  • Team IceShanty Addict
  • *
  • Posts: 606
Re: Run & Gunner
« Reply #6 on: Feb 25, 2013, 05:57 PM »
hard to run and gun with out an atv or snow machine.  no way to cover ground on foot looking for structure...

Offline toofuss

  • Team IceShanty Maniac
  • **
  • Posts: 1,183
  • stick 'em
Re: Run & Gunner
« Reply #7 on: Feb 25, 2013, 10:18 PM »
Depends on the size of lake your talking. Also by doing your homework you can divide the lake into small workable sections before you ever leave home. This is the way I fish 90% of the time. Just know where to start before you set foot on the ice

I was on a bus and just happened to be sitting on a news paper. This guy came up and asked. "Are you reading that ?"
I said  yes, stood up, turned the page and sat back down.

Offline Bassassins

  • IceShanty Rookie
  • **
  • Posts: 42
Re: Run & Gunner
« Reply #8 on: Feb 26, 2013, 10:09 AM »
Depends on the size of lake your talking. Also by doing your homework you can divide the lake into small workable sections before you ever leave home. This is the way I fish 90% of the time. Just know where to start before you set foot on the ice

Exactly!  Thanks everyone for the feedback - we understand some people have toys that CAN make this easier to do but that isn't always the truth.  We are city boys that bus or walk to most locations.  Research is key and this approach gets it done for us...

Primepin - thank you our high paid editors are now being fired lol but the mistake has been fixed on our site.

Again thanks everyone for reading - hope it allows some to venture outside of their shacks sometimes ;)
www.thebassassins.com
www.facebook.com/TheBassassins
Pro Staff - FISHBUM Outfitters, Angler's Choice, Streamside, Militant Outdoors, The Swedish Pimple, KAMAKAZI

Offline reddog11

  • Team IceShanty Maniac
  • **
  • Posts: 3,516
  • Lunker Lewie is the son of Adirondack Lew.
Re: Run & Gunner
« Reply #9 on: Feb 26, 2013, 01:30 PM »
Cool
Master Laker taker.

Offline Townie

  • Team IceShanty Maniac
  • **
  • Posts: 1,425
Re: Run & Gunner
« Reply #10 on: Feb 26, 2013, 04:29 PM »
Dave Genz has been advocating this approach for years. I for one can't stand jigging in the wind (tho' heavier spoons do make it easier) I still rely on a ultra lite flip-over to jig out of...
Bulls, Jumbos & Slabs Oh My!

Trooper Bri

  • Guest
Re: Run & Gunner
« Reply #11 on: Feb 26, 2013, 06:20 PM »
Cool post!!
I had to read this twice to make sure it wasn't a mockumentary. Love the "run n' gun" pic. All the same gear works for the "drill and wait" method BTW.  ;D

And it's steel leader, not "steal".  ;)

Offline Bassassins

  • IceShanty Rookie
  • **
  • Posts: 42
Re: Run & Gunner
« Reply #12 on: Feb 26, 2013, 08:49 PM »
Cool post!!
I had to read this twice to make sure it wasn't a mockumentary. Love the "run n' gun" pic. All the same gear works for the "drill and wait" method BTW.  ;D

And it's steel leader, not "steal".  ;)

Thanks Trooper - already been fixed on our site .... you are right though these tools are important in most ice fishing approaches just our take on this approach.  Drill and wait can involve some other toys... maybe that will be our next build?! :)

Smooth
www.thebassassins.com
www.facebook.com/TheBassassins
Pro Staff - FISHBUM Outfitters, Angler's Choice, Streamside, Militant Outdoors, The Swedish Pimple, KAMAKAZI

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.