The Iceshanty Ice Auger Board is sponsored by
Nils Master Authorized Sharpening Service

Author Topic: Jiffy fuel mix ratio  (Read 329 times)

Offline An2wan

  • IceShanty Rookie
  • **
  • Posts: 3
Jiffy fuel mix ratio
« on: Feb 20, 2019, 12:16 PM »
My jiffy calls for 24:1, 3.5 hp legend series. Question has or is anyone running amsoil 80:1 or 100:1 in there’s? Thanks

Offline Alex Delarge

  • Team IceShanty Addict
  • *
  • Posts: 719
Re: Jiffy fuel mix ratio
« Reply #1 on: Feb 20, 2019, 04:21 PM »
I run Amsoil Sabre Pro. I mix it @ ~ 75:1. The 24:1 mix that jiffy use to recommend was for dino oil. I would think most 2-cycle oils these days can run 40 or 50:1 and full synthetic 2-cycle can probably run @100:1 but I like to dial it back a bit.
It must be something in the water.

Offline An2wan

  • IceShanty Rookie
  • **
  • Posts: 3
Re: Jiffy fuel mix ratio
« Reply #2 on: Feb 20, 2019, 07:25 PM »
Cool thanks

Offline 77tech

  • IceShanty Rookie
  • **
  • Posts: 91
Re: Jiffy fuel mix ratio
« Reply #3 on: Feb 23, 2019, 11:05 PM »
If you go to the Jiffy web site they now recommend a 40:1 mix with their oil for all of the older Tecumseh engines.  I just use the 50:1 I have mixed up for my Stihl string trimmer.

Offline Iceattic

  • Team IceShanty Regular
  • ***
  • Posts: 175
Re: Jiffy fuel mix ratio
« Reply #4 on: Feb 24, 2019, 03:20 AM »
I run tru- fuel 50,1 It's in a can All Ready to go.

 



Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.