Support Iceshanty... Get some great gear and forum goodies... Join The Iceshanty Hardwater Militia
This is what I use for my 8" eskimo hand auger attached to my cordlesshttps://www.fishusa.com/product/Ice-Master-Ice-Auger-Power-Drill-Conversion-Kit
My direct connect Milwaukee Fuel with Ardisam Quick Connect. Sweet.
How does this attach? Does it have the same reverse thread as the chuck? Does it have a RH thread retaining screw?
The chuck is a 9/16 - 18 fine RIGHT Hand thread. The retaining screw is left hand. Retaining screw on the Mud Mixer is also left hand.
Most chucks are threaded left hand, and have a right hand screw that keeps them from loosening if you have to turn something backwards. I assume that red piece has the same setup?
Incorrect. I have a 20v DeWalt, 18v DeWalt, Milwaukee fuel (above post), Mwlk brushed & older Black & decker cordless and 2 corded drills. All have right hand threads on the Chuck and left hand threads on retainer screw. Think about it, a drill primary rotation is clockwise drilling holes and inserting screws so right hand threads turning clockwise tighten. Righty Tighty, Lefty Loosey.DeWalt 18v Chuck & Drive shaft right hand threaded pic.
I ordered this today. My chuck is getting rusty. Never lost the bit, but I don't have any kind of a retainer, and this looks to be secure. https://www.ebay.com/itm/Ice-Auger-Adapter-for-Cordless-Drill-No-Drill-Chuck-Style-Direct-Attach-Ice-Fish/183357837078?_trkparms=ao%3D1%26asc%3D20140109134348%26meid%3Daf75287de9b6468097fe3bed2764b0c8%26pid%3D100042%26%26itm%3D183357837078&_trksid=p5713.c100042.m2062
I read through this thread and I don't believe you stated what brand of drill you have. Just thought I would mention that if you have a Milwaukee Fuel, I don't think the adaptor you ordered will fit. The Fuel has a larger thread size that most 1/2" drill chucks.
papadarv: I looked on the Ardisam website and could not see the quick connect you mentioned, do you know where I might look to find it? Thank you.
Sportsman Guide on-Line. Price gone up about $7 since last June.https://www.sportsmansguide.com/product/index/ion-anchor-drill-adapter-with-quick-release?a=1724018&pm2d=CSE-SPG-15-PLA&utm_medium=PLA&utm_source=Google&utm_campaign=CI&gclid=CjwKCAiA767jBRBqEiwAGdAOrx9e_piiOeP3vlzAFSaLuIah6q2KD5Mwqefu_AyhpjDzzlPPzXZasxoCvxoQAvD_BwE
So where does the red piece between the drill and the Ardisam come from? Did you make it?