Author Topic: Hand auger modification (Read 5079 times)

Esox fisherman · « **on:** Nov 06, 2020, 02:48 PM »

I have a spare hand auger but it never came with a top so i got one and now need a way to attach it

Iceassin · « **Reply #1 on:** Nov 06, 2020, 03:18 PM »

Shoulder bolt?

missoulafish · « **Reply #2 on:** Nov 06, 2020, 03:29 PM »

That auger design doesnt need a top.

hardwater diehard · « **Reply #3 on:** Nov 06, 2020, 03:36 PM »

Picture of the complete/entire auger handle is needed . Does it look similar to this ..offset

Esox fisherman · « **Reply #4 on:** Nov 06, 2020, 04:36 PM »

Quote from: hardwater diehard on Nov 06, 2020, 03:36 PM

Picture of the complete/entire auger handle is needed . Does it look similar to this ..offset

Yes

hardwater diehard · « **Reply #5 on:** Nov 06, 2020, 04:43 PM »

If its an off set handle you got a oldie but a goodie..technique to drill a hole is a little different but much more effective

Esox fisherman · « **Reply #6 on:** Nov 06, 2020, 04:48 PM »

Well I perfer the top
So I could remove the current one

DR.SPECKLER · « **Reply #7 on:** Nov 06, 2020, 04:49 PM »

None of my offsets have a top knob.that knob is for putting downward pressure on a regular handle auger.which no pressure is applied on a offset and both hands turn.you already know that i bet but..

missoulafish · « **Reply #8 on:** Nov 06, 2020, 04:50 PM »

wont work the same ( if at all )but your more than welcome to do whatever you want:)

hardwater diehard · « **Reply #9 on:** Nov 06, 2020, 04:53 PM »

Quote from: Esox fisherman on Nov 06, 2020, 04:48 PM

Well I perfer the top
So I could remove the current one

Not certain you can retro fit that style ..and I think it would be super awkward to attempt to drill with it ..but you could buy new or used one ...or I bet you could trade yours for a 'straight' handle locally pretty quick..those handles are hard to find and can be priceless to some folks ..you cant buy that handle.. in the states at least.

https://www.rapala.com/strikemaster/auger-accessories/hand-ice-auger-accessories/in-line-handle--adjustable-/%231HSA.html?cgid=strikemaster-augerAccessories-handMiscAccessories&taglist=StrikeMaster%7CAuger%20Accessories%7CHand%20Ice%20Auger%20Accessories#start=2&cgid=strikemaster-augerAccessories-handMiscAccessories

hardwater diehard · « **Reply #10 on:** Nov 06, 2020, 04:56 PM »

Can you post a picture of the entire auger ? What size auger is it ?

Esox fisherman · « **Reply #11 on:** Nov 06, 2020, 04:59 PM »

Quote from: hardwater diehard on Nov 06, 2020, 04:56 PM

Can you post a picture of the entire auger ? What size auger is it ?

I really don’t know a friend gave me it as he got it from a friend and never used it so he gave me it before i got an electric
I believe a 6”

hardwater diehard · « **Reply #12 on:** Nov 06, 2020, 05:06 PM »

If it is an offset handle ( POSTING A PICTURE WOULD CONFIRM IT FOR ME !!!!) and you are able to mount that knob ..you would be defeating the whole purpose of the offset handle ..and I believe physics of drill would be severely hamper drilling . you will be putting an outside force from the side instead of on top/down onto the auger .

Esox fisherman · « **Reply #13 on:** Nov 06, 2020, 05:08 PM »

Quote from: hardwater diehard on Nov 06, 2020, 05:06 PM

If it is an offset handle ( POSTING A PICTURE WOULD CONFIRM IT FOR ME !!!!) and you are able to mount that knob ..you would be defeating the whole purpose of the offset handle ..and I believe physics of drill would be severely hamper drilling . you will be putting an outside force from the side instead of on top/down onto the auger .

So take off the offset handle then

hardwater diehard · « **Reply #14 on:** Nov 06, 2020, 05:10 PM »

Post a picture of the auger handle PLEASE

missoulafish · « **Reply #15 on:** Nov 06, 2020, 05:12 PM »

Esox fisherman · « **Reply #16 on:** Nov 06, 2020, 05:21 PM »

hardwater diehard · « **Reply #17 on:** Nov 06, 2020, 05:31 PM »

Ok first its not an offset handle ...so ignore my previous offset posts.. I am not familiar with that handle grip that is atop the handle as most have a knob ..maybe it was added by someone ..the auger being red tends to make me think its an Eskimo brand

Is the top part of the auger threaded ?..Where did you get the Knob ? and is that threaded ? Close up pictures of both would help .

DR.SPECKLER · « **Reply #18 on:** Nov 06, 2020, 05:31 PM »

Not offset and never had a knob up top.fwiw most top knobs just snap on.

Esox fisherman · « **Reply #19 on:** Nov 06, 2020, 05:51 PM »

I know as much as you guys on what type and brand auger it is

lefty2053 · « **Reply #20 on:** Nov 06, 2020, 06:22 PM »

HT artic Express auger.
http://htice.com/AE-8/

Esox fisherman · « **Reply #21 on:** Nov 07, 2020, 02:48 AM »

Thank you

lefty2053 · « **Reply #22 on:** Nov 07, 2020, 04:47 AM »

That doesn't take a top knob on it.

Esox fisherman · « **Reply #23 on:** Nov 07, 2020, 06:37 AM »

I know it doesn’t
I was looking for ideas to modify it so it can

DR.SPECKLER · « **Reply #24 on:** Nov 07, 2020, 07:12 AM »

Quote from: lefty2053 on Nov 07, 2020, 04:47 AM

That doesn't take a top knob on it.

lefty you getting sucked in again?lol advice bounces right off this kid.

hardwater diehard · « **Reply #25 on:** Nov 07, 2020, 07:13 AM »

Quote from: Esox fisherman on Nov 07, 2020, 06:37 AM

I know it doesn’t
I was looking for ideas to modify it so it can

I asked you to send close up pictures of the Knob you have (top and bottom) as well as the top of the auger handle .in order to accomplish any modification need more info ...but you did not . So buying a new handle is your only route at this time. $40 bucks from StrikeMaster and your in . Good Luck.

Raquettedacker · « **Reply #26 on:** Nov 07, 2020, 07:17 AM »

lefty2053 · « **Reply #27 on:** Nov 07, 2020, 08:28 AM »

Quote from: Esox fisherman on Nov 07, 2020, 06:37 AM

I know it doesn’t
I was looking for ideas to modify it so it can

badger132 · « **Reply #28 on:** Nov 07, 2020, 10:39 AM »

No matter what handle, you will not have much luck if you set the blades on the concrete floor with no cover, as shown in the picture you posted. Offset handle augers should not require only the pressure you put by resting your hands on the 2 handles. If that does not work, you need to sharpen or replace the blades.
Most people find the offset handle easier to turn, since both arms are used. The old "brace and bit" style handle, which uses a top cap for one hand to steady the top of the handle, while the other does all the turning, is getting less popular.

OldSailor · « **Reply #29 on:** Nov 07, 2020, 11:09 AM »

If nothing else, just use the auger bit with a drill and forget about the handle!!!

News:

Author Topic: Hand auger modification (Read 5079 times)