IceShanty.com's Ice Fishing Community

Ice Fishing Tips -Check your local regulations! => Ice Fishing Transportation => Topic started by: Uncle Al on Feb 24, 2019, 08:33 PM

Title: 97 polaris indy trail 500 2 up stopped moving
Post by: Uncle Al on Feb 24, 2019, 08:33 PM
polaris took a sh*t  on friday, was riding around the yard getting ready to load onto trailer when it just stopped. felt like it hit a wall. Engine still runs, but track won't turn, forward or reverse. Acts like it wants to move after giving it a little throttle but sheave will only move about an inch. checked chain case and chain is still in one piece with plenty of oil. Nothing up inside the track, sheaves are clean and a new belt on. Any ideas? thanks
Title: Re: 97 polaris indy trail 500 2 up stopped moving
Post by: meandcuznalfy on Feb 24, 2019, 08:36 PM
Broken clutch spring
Title: Re: 97 polaris indy trail 500 2 up stopped moving
Post by: aquarium234 on Feb 25, 2019, 11:54 AM
Belt rip?
Title: Re: 97 polaris indy trail 500 2 up stopped moving
Post by: Raquettedacker on Feb 25, 2019, 11:58 AM
Melted your hyfax/sliders to the track....   ???
Title: Re: 97 polaris indy trail 500 2 up stopped moving
Post by: DR.SPECKLER on Feb 25, 2019, 12:10 PM
Huh seized up bogie wheel bearings or drive wheel bearings.strange...che ck clutch/torque converter and belt,bogie wheels but make sure  parking brake is not on first lol.ive had the brake caliper sieze up too.take the belt off and jack sled up and see if track goes around to i guess.