Where to find good tube jig heads

[mofishin]

I’m looking for 1/4 and 3/8  tube jig heads with 4/0 and 5/0 strong hooks. Can’t seem to find anything with bigger than 3/0 hooks that size

[kasilofchrisn]

Making them yourself would certainly be one option.
Or you could contact a custom jig maker and see if they have a mold that will accommodate you.
I recommend you check out this jig maker.
http://cadmansjigs.weebly.com/
I no longer sell fishing tackle or I would do it for you.

[TheCrappieFisherman]

Big nasty sells ones with 4/0 hooks. Suppose to make quality eelpout and laker lures.

http://www.bignastytackle.com/products.html

[mofishin]

Thanks, I Think I found a guy. Lead free bass jigs came through with just what I needed with a simple email

[Jaguarxjsport]

Does the "Do It" company sell the shirts for the moulds for this type of jig? if so i would like to purchase them.
John

[bootstrap]

sometimes good head is hard to get.

[kasilofchrisn]

Does the "Do It" company sell the shirts for the moulds for this type of jig? if so i would like to purchase them.
John

Not sure what kind of "Shirts" your looking for.
But Do-It does sell soft plastic tube jig molds.
You really have two options there.
Buy a mold that has a spline insert with the skirt end having the thickness of strands your looking for. Or use a rod of the diameter your looking for and hand dip the tubes then remove the tubes and cut the skirt part afterwards.

[Jaguarxjsport]

Ooops my mistake nt checking the spelling.
Yes i am thinking of making the jig moulds and adding the skirts, not sure what sizes they come in, and if i can get white colour shirts.

Not sure what kind of "Shirts" your looking for.
But Do-It does sell soft plastic tube jig molds.
You really have two options there.
Buy a mold that has a spline insert with the skirt end having the thickness of strands your looking for. Or use a rod of the diameter your looking for and hand dip the tubes then remove the tubes and cut the skirt part afterwards.