IceShanty.com's Ice Fishing Community
Ice Fishing Tips -Check your local regulations! => Equipment => Ice Fishing With Electronics => Topic started by: maddogg on Feb 08, 2018, 06:22 PM
-
I've gotten my line wrapped around the transducer cable a few times and I know a hook into the cable can cause problems.
So I'm going to give this a try.It's 1/4 in. spiral tubing above the puck. I'll report back after I try it out.
(https://s17.postimg.cc/mc8i7551n/002.jpg) (https://postimg.cc/image/mc8i7551n/)
(https://s17.postimg.cc/vws4u123f/003.jpg) (https://postimg.cc/image/vws4u123f/)
-
Hmmmmmm .... Never considered that happening . I'm always one for preventative maintenance though . Thanks for the heads up !
-
Great idea, thanks for sharing it.
-
Isis the same thing with used corrugated tube with full length slit. Then used electrical tape wrapped all around to try and keep water from getting inside and freezing. I had something cute my cable about 2 inches up from the transducer. Luckily Lowrance sent me a new one under the 1 year. Warranty.
-
I was out 3 times so far it works very well.
Seems flexible enough in the cold and the transducer hangs straight.