Fly the Team Iceshanty Flag! Iceshanty Proshop
I'm planning on having a deep cycle battery in the shack, I bought 2 double LED lights for the ceiling and a single for over a table. I also bought a LED porch light. The shack is 8x12. I won't run all the lights at once, but when I need light I want it available.
Hi Buddy, thanks for the input. Did you put your two overhead lights on the center on your ceiling, or did you put them towards the edges? I thought about putting them near opposite walls thinking it would help with my wall mounted rattle reels.
i use led strip that's rolled onto a reel so they call them reel led strip. 16.4 feet long 5050 water proof smd and use a remote controlled in-line remote on/off/dimmer controller from amazon. i found the strip needs to be about 4 foot minimum for the remote to work. maybe it needs that length as a load for it to be seen.all of it is about 15$ plus wire and connectors. you choose how bright you want them and the remote has 100%, 50% and 25% and then infinite up/down to the maximum brightness down to maybe 10%.led'shttps://www.amazon.com/SUPERNIGHT-5050SMD-Waterproof-Flexible-Version/dp/B00U5Y24QO/ref=sr_1_15?ie=UTF8&qid=1473473356&sr=8-15&keywords=5050+led+lights+waterproofwirehttps://www.amazon.com/EvZ-Extension-Strips-Single-Colour/dp/B009VCZ4V8/ref=pd_sim_60_12?ie=UTF8&psc=1&refRID=TW1G9AKMMC5AHTG7SED9fasteners for hard walls. i use velcro one wrap for pole mounting. the tape backer it has is junk and you should leave the paper on it always to help protect the circuit from shorts.https://www.amazon.com/SpiritLED-Mounting-Bracket-included-Waterproof/dp/B01F4U2K4E/ref=pd_sim_60_52?ie=UTF8&psc=1&refRID=TW1G9AKMMC5AHTG7SED9in-line on/off/dimmer and can be found cheaperhttps://www.amazon.com/Controller-Dimmer-Sinlge-Color-DC12V/dp/B016W9AA4I/ref=sr_1_106?s=hi&ie=UTF8&qid=1473473732&sr=1-106&keywords=Mini+Remote+Controller+for+Single+Color+LED+Strip+Lightsremote controlled on/off/dimmer. i bought them cheaper, but these are cheaphttps://www.amazon.com/Remote-Controller-DOITOP-Wireless-Control/dp/B01I92JPZ6/ref=sr_1_55?s=hi&ie=UTF8&qid=1473473683&sr=1-55&keywords=Mini+Remote+Controller+for+Single+Color+LED+Strip+Lights
so new guy here, especially new to adding things to my Frabill Commando..... One thing ive wanted to do for sure is add some of those strip LED lights to at least a bar or two in the flip-over. First off I just purchased the strip lights, some wire and the inline on/off dimmer switch from Amazon (the ones listed above) I figured i'd get the lights attached to the bars like mentioned with velcro or whatever, but my main question (since ive never done this - and this is super newbie) what do you do to get them wired and hooked up to say a flasher battery? Do you just solder the strips to some wire, then to the dimmer, then to some alligator clips? Again this is something new to me.......thanks in advance -b-