Pages: [1] |   Go Down

Author Topic: Trekker II question?  (Read 516 times)

Offline graybeard1

  • Team IceShanty Regular
  • ***
  • Posts: 279
Trekker II question?
« on: Dec 16, 2009, 12:36 PM »
 Okay, I bought a new Trekker II yesterday. I've got it pretty well set up, but when I flip it over, the front or bottom pole sits about 4+ inches off the floor. Is it supposed to be that high, or what do I do to bring it down? Thanks for the help.
Logged

Offline rtibbs48

  • Team IceShanty Regular
  • ***
  • Posts: 468
Re: Trekker II question?
« Reply #1 on: Dec 16, 2009, 01:01 PM »
I 'm not sure about the trekker II, but on the clams if you pull the canvas to tight where you attach to the back of the tub if will lift the bar off the ground, not sure how the trekker attaches. may be your problem.
Logged

Offline Blaine

  • Team IceShanty Maniac
  • **
  • Posts: 1,833
Re: Trekker II question?
« Reply #2 on: Dec 16, 2009, 03:07 PM »
Yep... I've built a ton of them here at the shop... Sounds like the canvas is too tight. Remove the screws and seal and do it again. Have some one stand on the front or put something heavy on it wheil you're snugging things up.
Logged

Offline rtibbs48

  • Team IceShanty Regular
  • ***
  • Posts: 468
Re: Trekker II question?
« Reply #3 on: Dec 16, 2009, 03:30 PM »
THe front bar should  just lightly touch the ground.
Logged

Offline graybeard1

  • Team IceShanty Regular
  • ***
  • Posts: 279
Re: Trekker II question?
« Reply #4 on: Dec 16, 2009, 07:14 PM »
Thanks, I loosened it up a bit, and it worked much better. Thankfully I didn't have the screws in yet.
Logged

Offline rtibbs48

  • Team IceShanty Regular
  • ***
  • Posts: 468
Re: Trekker II question?
« Reply #5 on: Dec 17, 2009, 04:19 PM »
Good luck, and enjoy
Logged
Pages: [1] |   Go Up
 


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.