I used thread stock (3/8") that I bent into a pseudo "J" shape and bolted to edge of Jet Sled. I use 1" aluminum square tubing to support the mounting of the J shaped thread stock and placed that underneath the edge of the sled. I covered the thread stock with rubber hose to protect the auger.
Pleas see picture below.
I also notched out the rear 2x4s that make of the smitty sled ski base. I bolted removable 1" aluminum square tubing that was also bent into a lazy J shape. This holds my 60 lb hub shelter. You can kind of see the hub shelter hanging off the side of the sled and where the square tubing is mounted to 2x4s in the attached picture.
d1