IceShanty.com's Ice Fishing Community
IceShanty Main => General Ice Fishing Chit Chat => Topic started by: Isaac on Nov 07, 2019, 07:24 PM
-
Looking for anyone that tried to duplicate the quick attachments on the rhino/otter monster box. My current enclosed trailer is to narrow to drive the wheeler in with the auger shield attached to the box. I thought if I could replicate the Male quick connect I could remove from box and hang on the side of the trailer. Any tips or suggestions appreciated.
(https://i.postimg.cc/ykSdHYvp/20191107-165459.jpg) (https://postimg.cc/ykSdHYvp)
-
Looking at your photo it looks like you just "hang" the other half onto those tracks, right? Then nothing more than a couple of pieces of oak or maple and a bit of handy work with the table saw and a dado blade could make them in a hurry. Then use some heavy screws to mount them inside your trailer. I would mount the new ones at a point that the bottom of the auger shield would be resting on the floor to alleviate any extra weigh bouncing around.