The Iceshanty Ice Auger Board is sponsored by
Nils Master Authorized Sharpening Service

Author Topic: Strikemaster 40v Lithium and Ice Anchors  (Read 728 times)

Offline BigSling

  • Team IceShanty Regular
  • ***
  • Posts: 203
Strikemaster 40v Lithium and Ice Anchors
« on: Mar 23, 2018, 03:07 PM »
I know Ion augers offers an adapter so the powerhead can be used to install ice anchors. Curious if any owners of the new Strikemaster 40v lithium have created an adapter so something like the Eskimo ice anchor drill adapter could be used?

I checked with Strikemaster if they had plans for such a gadget in the future and was told none was planned now but the idea would get passed along.

I'm leaning towards a drill/k-drill setup next season but figured I'd explore all options.

Offline SirCranksalot

  • Team IceShanty Maniac
  • **
  • Posts: 1,652
Re: Strikemaster 40v Lithium and Ice Anchors
« Reply #1 on: Mar 23, 2018, 08:18 PM »
A lightweight drill and some lag bolts 6-8" long should serve as tent pegs. Drill on approx 45 deg angle. If you do any tent camping in the summer you will be familiar with the set-up.
Keep yer stick on the ice!

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.