Ice Fishing VT Board sponsored by

Author Topic: jiffy auger clutch parts anywhere?  (Read 428 times)

Offline dan murphy

  • IceShanty Rookie
  • **
  • Posts: 1
jiffy auger clutch parts anywhere?
« on: Feb 28, 2021, 01:43 PM »
 :tipup:need jiffy auger clutch parts for 48 ccshark

Offline Raquettedacker

  • IceShanty Mod Team
  • Team IceshantyInsanity
  • *
  • Posts: 12,817
Re: jiffy auger clutch parts anywhere?
« Reply #1 on: Feb 28, 2021, 01:52 PM »
Google them.
 About $65 online.. ;)
Strangers stopping strangers just to shake there hand.
         The successful life were living has us feuding like the Hatfields and McCoys...
Pro Staff Member "Team Loser"
     

Offline Light liner

  • Team IceShanty Maniac
  • **
  • Posts: 1,782
  • Rather be judged by 12 then carried by 6.
Re: jiffy auger clutch parts anywhere?
« Reply #2 on: Feb 28, 2021, 07:41 PM »
People still use gas augers?
Champlain
Memphremagog

Offline EyERipLip

  • Team IceShanty Regular
  • ***
  • Posts: 326
  • Above the Ice, under the influence
Re: jiffy auger clutch parts anywhere?
« Reply #3 on: Mar 01, 2021, 04:30 AM »
Yup People who know about reliability do

Offline Light liner

  • Team IceShanty Maniac
  • **
  • Posts: 1,782
  • Rather be judged by 12 then carried by 6.
Re: jiffy auger clutch parts anywhere?
« Reply #4 on: Mar 01, 2021, 08:29 AM »
Yup People who know about reliability do

Huh?
Champlain
Memphremagog

Offline VTMTB

  • IceShanty Rookie
  • **
  • Posts: 38
Re: jiffy auger clutch parts anywhere?
« Reply #5 on: Mar 01, 2021, 11:23 AM »
Huh?

This was my question as well. I've had my ION for 4 seasons, likely drilled well over 200 holes with it and never had an issue. In fact, on average I only have to charge  it 3-4 times per season. I'm sure some people have had issues w/the electric augers, nothing is perfect, but I've not heard anybody swearing at an electric auger that won't start when it's -10...can't say the same for gas augers. But use what 'ya got, electric augers are not cheap and if you've got a gas one that works keep at it and get your $$ out of it as they likely weren't cheap when you bought it either.

Offline Rebelss

  • Iceshanty Militia
  • Team IceshantyInsanity
  • *
  • Posts: 10,976
  • Inventor of Minnow Magic Muckletonian Society
Re: jiffy auger clutch parts anywhere?
« Reply #6 on: Mar 01, 2021, 11:28 AM »



                                    


"Seems like time is here and gone".....Doobies

Online DR.SPECKLER

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 7,222
  • find your own fish..
Re: jiffy auger clutch parts anywhere?
« Reply #7 on: Mar 01, 2021, 11:55 AM »
Shunning a guy that uses a gas auger is ridiculous.lol and a well maintained gas auger will start in minus 10 with no problems.wonder how those snowmobiles run in that temp?i run electric and gas augers still.guys will see that electric augers and drills will burn up way before a gas auger will.my 1970 1 arm bandit still runs.my ridgid drill will be long gone in that many years.

Offline stick eyes

  • Team IceShanty Regular
  • ***
  • Posts: 205
Re: jiffy auger clutch parts anywhere?
« Reply #8 on: Mar 03, 2021, 06:20 PM »
I had a mod 30 jiffy for years. Had good luck with it. I went electric 4 years ago . I like that I  can leave it in the back seat of my extend a cab with no smell. So far i love the ion. I still keep the good old mora finbor 6 inch hand augar for ice less than 8 inches or so. Whatever gets you to the fish is good

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.