Visit the Team Iceshanty Proshop
pull up on the flag. nice traps
You need to remove the screw below it. You will probably have to remove the assembly to do that, then check to see if the plastic part will in fact slide. Reposition the screw on the main wood part
that plastic thing that the flag tip is in is for when it's being transported. Remove the tip of the flag from that plastic holder, set it in the metal clip, and then when the spool moves, it lets the flag go up. The flag is supposed to go flying up when it trips!! Point it away from your face!!
Cut a 1/2 inch off the flag shaft.
Sackless, I sent you a PM. I will replace the entire set free of charge, and tell you how to fix the others. Sorry about that. The sooner I get your mailing address the sooner you will have the replacements. Sorry for the screw up!Thanks mike
Now I must admit, this exceeds any customer service I have received by 1 million percent!...much better than my ordeal with Eskimo![Nice when you can go right to the top with a concern regarding a product!
don't need to. can fix all 4 traps in less than 10 min.
Must have been the assembly line Porter was doing that day
Growler hour on the assembly line
That screw was a nice upgrade. I dont have them on mine and it was added because the lock would slide all the way down during fishing and when you pick up and put away, the ice at the water line prevents sliding back up to lock in the flag....I need an upgrade...
Pow Wow made a funny......" Screw up " ..get it?