paying it forward

[Rugburn]

And the extension is still up for grabs.

[Raptortrapper]

Well, perhaps we've reached the end of the line.  The items left are items nobody wants, or can use.  Or maybe it is just cause it is the end of the season.  I'll do some digging, and see if I can find something else.

[Adkrs]

Well, perhaps we've reached the end of the line.  The items left are items nobody wants, or can use.  Or maybe it is just cause it is the end of the season.  I'll do some digging, and see if I can find something else.

Im thinking its becauae its the end of the season for most of us.

[lostbrit]

might kick start this up again in October/November. 

[FG Steve]

Good call.  I don't think it's dead.  Just the season winding down.

[Raptortrapper]

Good call.  I don't think it's dead.  Just the season winding down.

Yup.  Agreed.  Went to the lake to get another trip in today, and it didn't happen.  Ice was thin and at least 6 feet out from shore.  My season is officially done, but it was a good one!!

[sdatver]

Got my flies today! They look good thanks GourdneckGills! With as quiet as it has been around here I will wait to put my items up next season. Thanks again.

[Old Goat]

looking for 2 clam one man flipover brackets  for the hoop poles

[tomturkey]

OG
There was some one that built there own flip a while back and had a thread about the build. Maybe if you can find the thread you can see what he did to make his own brackets

[Old Goat]

got a couple brackets so not needed now

[Old Goat]

In honor of IS 20th birthday I have a New Beaver Dam Tipup  that retails for 45-50 to give away    Red Version

[Cparsons]

if the tip up is still available id be thrilled to have it. I was just telling my buddy the other day i wanted to try doing some tip up fishing this year!

[Cparsons]

Also i will go through my stuff tonight and find something to pass along to someone else

[Old Goat]

Also i will go through my stuff tonight and find something to pass along to someone else

It's yours pm your address info and thanks for going through your stuff and keeping the pay it forward

[Cparsons]

Ok sorry for the delay, I finally got some time to look through a little bit of my stuff. I found something that may be useful to someone else, I have had it for a few years now and never needed so it's time the pay it forward!

The item is a used 19 degree Vexilar transducer. I have always kept it as a spare but like I said I have never needed it so hopefully someone out there is needing one!

[DR.SPECKLER]

Ok sorry for the delay, I finally got some time to look through a little bit of my stuff. I found something that may be useful to someone else, I have had it for a few years now and never needed so it's time the pay it forward!

The item is a used 19 degree Vexilar transducer. I have always kept it as a spare but like I said I have never needed it so hopefully someone out there is needing one!

I would like the ducer if its available still my fl8 has a cut I didn't notice while charging it yesterday.

[Ice Scratcher]

And the extension is still up for grabs.

I'll take that extension if it's still available please?

I'm going to check, I think I have something pretty cool to pay it forward with....

<°)))>{

[Cparsons]

The ducer is yours dr speckler pm me your address

[DR.SPECKLER]

The ducer is yours dr speckler pm me your address

thanks pm sent and I have a brand new set of 5 inch mora blades to pay it forward to anyone that needs them.

[Old Goat]

Doc I'll take the Mora Blades

[DR.SPECKLER]

Doc I'll take the Mora Blades

there yours O.G. pm me your  address and I will send them out this week.

[Old Goat]

Thanks Doc I'll pm my info to you

[Rugburn]

I'll take that extension if it's still available please?

I'm going to check, I think I have something pretty cool to pay it forward with....

<°)))>{

Haven't been on site for a while, good thing I checked in. PM me your address Scratcher and I'll get the extension out to you.

[Ice Scratcher]

Haven't been on site for a while, good thing I checked in. PM me your address Scratcher and I'll get the extension out to you.

PM sent...

Thanks a bunch man!!

It exactly what I need for my new mora 8" I just picked up to go with the Clam plate and the new gear box they're coming out with!!

http://stores.clamoutdoors.com/new-for-2016-2017/conversion-kit-gear-box.html

I like that it's aluminum too, nice and light!!

Hopefully we'll get a good winter this season..

<°)))>{

[Ice Scratcher]

For my payment I'll forward one of these to a member...

Member's choice of ONE either a 12" OR 24"

LED light bar..

Either one of these should throw a lot more light than the light bar Clam sells..

The bigger 24" one has 30 LEDs and the 12" has 15..

Both are in a sealed epoxy filled aluminum channel.. I will be installing one of these in my flip over.. I'm thinking they should be pretty durable and weather proof being sealed in the epoxy.. These came out of some commercial Apple Computer display cabinets we tore out of a Micro Center store.. They are super bright, and use some juice, obviously the 24" uses twice as much as the 12".. 

Which ever one you choose is 12V DC rated..









I'll test it before sending but this is slightly experimental, never tested on the hard water.. And not sure how long it will last..  It will be up to the recipient as to how you're going to wire and power it.. They do already have a few inches of wire at both ends..

<°)))>{

[Ice Scratcher]

I put one in the freezer and froze it, took it out and connected it still frozen and it worked like a champ!! I got about 8 hours out of my vexilar battery running both the strips above and the vex too.. So either one should work fine running as long as you charge your battery between trips...

<°)))>{

[Rugburn]

  If it hasn't been spoken for, I'll take the 12". Your extension ships today.

[Ice Scratcher]

It's all yours Rugburn!!

Send me your address..

<°)))>{

[river rat78]

I have an 8" Jiffy serrated ripper blade for anyone that wants it. It's #3538 and replaces #1801, #1801-D

[Ice Scratcher]

Just got home and found a package on my porch!!!

My 16" extension for my Mora to Clam plate rig..

Rugburn called it a homemade extension, looks more like pro-made to me.. Fits like a glove and seems like the perfect height!!!

Thanks a bunch Rugburn, nice work man!!





<°)))>{