Visit the Team Iceshanty Proshop
Pour point has little to do with the oils actual performance.
Here are the specs and such on the container. SPECTRO SYN-SNO Full Synthetic Power Valve Formula ISO-EDG+ JASO-FD 2-cycle Pours at -70. For use in Polaris, Yamaha, Ski-Doo, Artic Cat. Blended Especially for EXTREME CONDITIONS. Also on back Meets JASO-FD ISO-L-EGDHope this helps Kim
Pour point is pretty much a non factor when you pre mix it with gas. Now a oil injection system like on outboard motors or snowmobiles yes.
It always amazes me. That one will by a Strike Master or Jiffy auger and not use the oil Jiffy or Strike Master have for their own products. Ether way after pouring your oil into your gas. Take some of that gas and pour back into the oil bottle and swish it around then pour the contents into your gas oil mixture.
My sled was injector system. I will be doing more research and pre-mix for my power augers and test operation. Never use more than 1 gal gas per year. Ice needs to be 6"+ before power auger is put to use. Only have 6 weekends to fish and maybe a day or 2. Thanks for the help.......... BTW= I didn't want to dispose of $40 gal oil if it could be properly used without burning an engine up.... Kim