Click here to order with free shipping.Team Iceshanty Patches! Most iceshanty boards are represented
Found these ..although he dosent have any Ridgid battery option ..he may be willing tohttps://www.cobymanufacturing.com/product-page/prefinished-tool-battery-power-consolehttps://www.cobymanufacturing.com/product-page/dewalt-portable-power-adaptor
I hate to piggy back off of someones post but I have looked all over and this group seems to know their stuff. I want to run my lights in my clam flip over off of my milwaukee batteries. I already use the drill for my auger and my 5.o battery is lighter then the flasher battery I was using to run the light. Any help?
A Milwaukee M12 battery plus a M12 adapter will work, too which also has a small round plug on the side to give 12V output. The good thing is, this M12 battery is already 12V, so there are no conversion to 12V required. The 'bad' thing is, a M12 battery is usually of smaller capactiy/Ah such as 2.0, 3.0Ah which could power your fishfinder for not too long (say for a few hours depending on your fishfinder such as its monitor/screen size, etc)On the other hand, with M18 battery with 18V, the M18 adapter needs to convert/lower 18V to 12V resulting in restriction with the conversion circuit board, giving at most 1.0amp output current, which in my case is fine to power my Lowrance fishfinder with a 7-inch monitor which requires/draws around 0.7amp current. I guess I am saying if you have a fishfinder that requires higher current output, then this M18 battery plus M18 adapter might not be good enough. The plus side of this M18 battery plus M18 battery combination is, you can easily get a 5, 6 9 or even 12Ah M18 battery which would be good to power your fishfinder for a long time. In my case I use a 9ah M18 battery, and it powers my fishfinder all day long.