IceShanty.com's Ice Fishing Community
Ice Fishing Tips -Check your local regulations! => Equipment => Ice Augers => Topic started by: ac338 on Jan 27, 2019, 08:25 PM
-
I just picked up and broke in my new Eskimo F1 Rocket 8" auger today and had a few questions. The manual doesnt mention a half choke position and between run and choke is a bump to divide the two, do you leave in full choke during warmup or move it onto the bump? Also is it normal to leak a small amount of gas around the cap while running? Thank you.
-
If you leave it in full choke too long it'll stall out the motor. I'd leave it in full choke for a few seconds then move to half choke. If it starts to stall out on half choke move it back to full choke.
-
Thank you Chris. I was just thrown off with where the half choke position was since its basically just a bump between run and choke.
-
Glad I could help you out Pal.
-
One thing to remember. Put choke in run position when priming. Once you get it figured out you'll love it.
Light weight and cuts like butter. Got mine for a steal last year and after solving a plugged gas cap issue it runs like a top. One of the best investments I've made.
-
Thanks for the advice. It definitely cuts fast and is ALOT lighter than my one armed bandit.