Fly the Team Iceshanty Flag! Iceshanty Proshop
hey scratcher is that 1.5 or 1.25 sched.40
those are just some killer modifications and inventions scratcher .thanks allot for sharing .love weight saving ideas being we have to pull by hand here in pa and I take way to much tackle
bought some yoga blocks for my Clam xl6000 for a floor. Keeps the shanty dry and warm
Hey Ice Scratcher! Got anymore mods? I am loving what I have seen so far and I will definitely need to look into using some of them myself!
Mora style auger cover, made from PVC, and some shock cord...<°)))>{
I am now in the need of a new blade protector. What size PVC did you use for this blade protector? assuming one end cap is glued and the other is loose. is the loose end larger than the outside diam of the PVC? How wide did you cut the slot?
thanks! I just might have some scrap 1 1/2" downstairs. so 1 1/2" caps on both ends
Yep, just the standard PVC end caps.
Did you sand a little off the inside of the removable cap to make a looser fit? or does the pipe with the slot cut out flex enough that it isn't an issue taking the cap off when cold?
Could you just cut the slotted piece longer and skip the caps?
Fair, thanks for clarifying. Need to replace my mora cover, the rubber rope snapped.Gorilla gluing magnets to the bottom of the cover only lasted 3 or 4 trips This looks more reliable.
If your old cap is still good and the "rubber rope" is the only thing wrong I've used the shock/bungee stuff to replace the solid rubber. Lasts for years (and years).
Thanks esox and diehard.I actually have a few dozen of those bungee ball cords in my camping gear, bought them to hang a huge tarp over the tents last year as a rain guard. Never even opened the package. Will give it a shot today, augers, shanty and spud bar are the last of the gear I need to store
Gotcha. Tie a know and hook the ball where the rubber cord would be. Will look into that